Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Good finish for poplar & padauk?

Posts

Good finish for poplar & padauk?

#1

Good finish for poplar & padauk?

Dan Mitchell

>I recently made a box which is to be a gift for my MIL. The box itself is poplar, with a lid handle (and possibly a base, if I decide to "guild the lily" a bit) of Padauk. Given my recent problems using spar urethane on a Padauk lamp base, I want to make sure I pick a good finish for this combination of woods. I'm looking for a clear, medium-gloss finish. Does anyone have any recommendations?

TIA

Dan

Re: Good finish for poplar & padauk?

#2

Re: Good finish for poplar & padauk?

Clint Searl, at the base of Haycock Mtn

>Water borne poly or solvent lacquer. For such a project, I think clear Krylon would be fine.....and easy.

Clint

Re: Good finish for poplar & padauk?

#3

Re: Good finish for poplar & padauk?

Lee Schierer - McKean, PA

>I have no experience with Paduk, but Poplar accepts almost any finish. After the first coat it will feel like 220 grit sandpaper, but resanding will fix that and all subsequent coats should come out smooth.

I recently tried Cabot's Clear Lacquer in spray cans and have like the results. It is available in gloss, semi-gloss and satin.

Lee

Re: Good finish for poplar & padauk?

#4

Re: Good finish for poplar & padauk?

Ken Oakley-Sunny St. Cloud, Fla.

>Deft spray on or brush on lacquer. I buy mine at Wally World

Re: Good finish for poplar & padauk?

#5

Re: Good finish for poplar & padauk?

on Henthorn

>Back when I was making bows I used epoxy. I did it out doors because I found I was a little allergic to the epoxy. It was a good finish for me.