Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Barrel stave bob sled *LINK*

Posts

Barrel stave bob sled *LINK*

#1

Barrel stave bob sled *LINK*

Brandon in Cincinnati

>Hi everyone. Long time lurker here from the old Badger Pond days. I was hoping to draw on everyones experience a little.

My question is, has anyone built a bob-sled using old barrel staves, such as the one below? (Scroll down a little - it's the "two-axle" version, which they call a toboggan). I think this is the coolest thing and am considering building it as a Christmas gift for my kids. The staves can be had for about $4 a piece at a couple of different web sites. My concern is that (a) this thing would be very heavy (b) would it slide well? I'd appreciate hearing anyone's experience building and using anything similar. Thanks for your time.


Barrel Stave Sled

Re: Barrel stave bob sled *LINK*

#2

My guess,

Keith Newton------WebKitFormBoundaryV6MZb+tiOpocz6

>And this is just a guess, but I would think that barrel staves would have too much camber with no glide surface to be very effective.

If you don't have the ability to bend up the tip of the ski, I would suggest that you look for some cheap old skis to cut up and use for your needs. I'll bet you will get a lighter, faster more fun ride for the kids.

I would bet that if you used another approach, you might find willing contributions on how to orient the steering so the skids tilted up to cut an edge for better stearing effect, rather than just point the front one way, while sliding sideways.

Keep working on it. Sounds like a fun project. Don't leave the kids out of the building / planning process. That would be something that they will remember for the rest of their life. Good luck.

Re: Barrel stave bob sled *LINK*

#3

Too heavy

Tom Dunlap

>I SAW a bumper sticker..."OBEY GRAVITY: it's the Law"

Anything is fun to slide down the hill...light weight is easier to take back up for another run.

Give me an inner tube on any given sliding day. Small one for me, truck tire for a hogpile. Then, have the dog along to pull the tube back up...hahha!

When I was a kid we had a great sliding hill in the woods next door. My sister went on the Flying Saucer, hit a bump, came down and injured her Coccyx (Tail-Bone). After that Dad told us never to go down a hill while sitting, always laying flat or kneeling on a tobaggan.

During the summer our parents would bring home waxed produce cardboard for sliding. We used that hill 12 months a year.

Re: Barrel stave bob sled *LINK*

#4

Re: My guess,

Brandon in Cincinnati

>Keith - thanks for the thoughts. Not sure I follow completely when you're talking about "...how to orient the steering so the skids tilted up to cut an edge for better stearing effect, rather than just point the front one way, while sliding sideways." Can you expand a little on what you mean? Thanks again.