Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Veenering 101 - - couple quick questions

Posts

Veenering 101 - - couple quick questions

#1

Veenering 101 - - couple quick questions

Pete in Holland, MI

>First time veneering project in the near future.

Purchased a couple sheets of walnut burl at a clearance center today. It isn't flat and kinda ripply. I need to create a couple panels about 10" square with the veneer affixed to it.

1) Will the ripples flatten under pressure without issue? Thought I read someplace one time to dampen it to make it more flexible.

2) Regular ole yellow glue to stick it down, or something else?

Not planning on getting too involved with veneering at this point, so vacuum bags & such are not in the works for now.

Thanks !

Pete

Re: Veenering 101 - - couple quick questions

#2

recent thread on veneer flattening  *LINK*

John K Jordan

>


http://www.woodcentral.com/cgi-bin/messages3.pl?re

Re: Veenering 101 - - couple quick questions

#3

professional advice

Bill Tindall, E.TN

>Not my professional advise but that of Jeff Headley from whom I recently took a class where we veneered some crotch mahogany. Mine was very lumpy, more than 1" high lumps. Jeff said no problem. We took a 3" paint brush and white glue and slathered glue on veneer and substrate and mashed them together with a multitude of clamps.

The picture shows Jeff slathering on the glue. For some reason people I have watched always veneer with white glue. Note edge of veneer to see how not flat it is.

You must get uniform pressure to get a good bond.


img

Re: Veenering 101 - - couple quick questions

#4

Thanks guys !

Pete LaBelle

>

Re: Veenering 101 - - couple quick questions

#5

Thanks guys !

Pete LaBelle

>