Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Slightly OT Bloodthinners and woodworking

Posts

Slightly OT Bloodthinners and woodworking

#1

Slightly OT Bloodthinners and woodworking

Randy Johnson Connersville IN

>I recently spent three nights and two days in the hospital due to a blood clot in my left leg. During the stay I received blood thinners both by injection and orally. At the present time I take 5mg of Coumadin at the rate of one each day for two days, skip a day, and then one a day for two again.

I�m pretty sure the problem is a complication from surgery I had on September, 29. As a result of that surgery about all I could do for a month was go to the shop for a visit. I was beginning to feel the first pangs of withdrawal. When I first started the blood thinners I was hearing horror stories that almost had me afraid to shave. Now, after a few weeks I am finding that, what for me anyway, is normal nicks and cuts on my hide stop bleeding at pretty much the same rate they always have.

So the bottom line for those of you who have been there, done that, is, did you let the medication keep you out of the shop? I can stay away from the REALLY dangerous things like the table saw but I sure would like to play with the lathe again.

Re: Slightly OT Bloodthinners and woodworking

#2

Re: Slightly OT Bloodthinners and woodworking

MikeW

>Hi Randy,

For me it was a couple heart attacks this year (one major, one little bump in the road). I stopped taking the thinners (and other drugs) after a while due to interactions and bad side effects. I still take the Plavix, which does cause me to bruise easily. So much so I had to stop taking the asprin in addition to Plavix.

But keep me out of the shop? Nah. Heck, that would mean I couldn't do my day job. For me, life is too short as it is to not enjoy the things I love. Now, that doesn't mean I am not now more conscious of what I am doing or is happening around me. I am. Might even be a good thing that I am more aware.

Take care, Mike

Re: Slightly OT Bloodthinners and woodworking

#3

Re: Slightly OT Bloodthinners and woodworking

John E in SC

>I'm a family doc and manage lots of patients on warfarin. As long as you get your blood checks and stay in therapeutic range, you shouldn't be in any serious danger from woodworking unless you were to have a major accident (which we all try to avoid anyway!) I wouldn't let it keep you from doing something you enjoy - just do it safely!

John

Re: Slightly OT Bloodthinners and woodworking

#4

Re: Slightly OT Bloodthinners and woodworking

George@Colonel's Workshop-Havertown PA

>Good Afternoon Randy,

I'm supposed to take blood thinners, and do every day. In my case, one baby aspirin does it, although I have taken cumidin--forget exactly why. The effects are easy bruising. I have to also take a steroid cream for skin problems on my arms, and that thins it out to where a slight nick or bump results in a flood of blood. And, if its on an already bruised area I literally leave a trail of blood on the floor. A band aide or two and a few minutes time is all I need. I dislike it when the blood stains the wood I'm working, or when it lands on a polished cast iron surface. My bleeding is not severe nor prolonged. Just something I deal with. I've had a heart attack also as well as a quintupple by-pass--and now a pace maker. The shop is where I choose to be.

George

Re: Slightly OT Bloodthinners and woodworking

#5

Re: Slightly OT Blood thinners and woodworking *LINK*

Brent Smith, Montreal

>Hi Randy,

I've been on an average of 15 mg of coumadin a day, and will be for the rest of my life, since I had an Aortic valve replacement a few years back. At first I was freaked out by the idea of cutting myself because of the stories you hear. After a few months I said the h**l with it and got back to normal. Like you, I find that small nicks and scrapes stop bleeding fairly quickly. I have had a few larger cuts that resulted in hospital visits and one surgery that resulted in a prolonged stay because of the coumadin. I also find that I'll bruise just by carrying lumber around. The main thing that I've learned over the years is that anything major is compounded by the fact that you are on 'blood thinners'. First they have to lower your INR, then do the repair and finally get your INR back up to where they want it.

Has it kept me out of the shop....NO. I will say that I usually look over an operation before I start it with more care than I use to though. I also keep a blood clotting pad along with a tourniquet in my first aid kit, but I think that's just good practice whether on blood thinners or not.


Blood Clotting Pad

Re: Slightly OT Bloodthinners and woodworking

#6

Get back out there!!

doug f, san clemente, ca

>Coumadin is very closely monitored. For major cuts it's dangerous, yes, but you no doubt avoid those anyway. Minor dings and scrapes just take a little longer than usual.

Grab the chisels and let 'er rip.

Doug

Re: Slightly OT Bloodthinners and woodworking

#7

A.J. Hamler

My "thin" blood hasn't stopped me yet

A.J. Hamler

>I've always had bleeding and bruising issues as long as I could remember. About 15 or so years ago I had a bruise on my arm that was so bad that it went all the way around my arm and met on the other side. That was about the time I decided to get this thing taken care of. They did a battery of tests, some of them just this side of ghoulish -- in one, they cut me and used a stopwatch to see how long I'd bleed.

Once they ruled out everything dangerous with a name, they finally decided I have a "qualitative platelet disorder." I've got bags of platelets, it seems, but they all apparently suck. As a result I bleed at anything. A lot of times in the shop or yard I'll suddenly notice a small blood smear on whatever I'm working on, and then I'll have to search to see where it's coming from. Really annoying. And usually, once I find it, it's so tiny as to be unbelievable. And I can have the tiniest of scabs, and if I forget about it I'll scratch it open absentmindedly -- like scratching a tiny itch or something -- and I'll suddenly have blood everywhere. I have a couple of those black stain marks on my table saw; you know, the kind you get if you get water drops on it that you didn't find fast enough, except they're from where I've bled and didn't know it.

Sounds scary, but I've been told it's not. It's mainly when I get small cuts that the blood is exponentially large. If I ever get a really, really big one, chances are good that I'd bleed the same as anyone else. They ended up telling me that I only needed to be concerned about one thing, and that's having surgery where they didn't know about my issue. For that reason, I wear a MedicAlert tag. It wouldn't be a dangerous surgery issue, as they can control it, but they do need to know so I never take that tag off.

One the plus side -- and this is a huge plus -- they also told me it's extremely unlikely that I'll ever have a stroke, and very unlikely that I'd ever have a heart attack.

Unless I look at how much my 401K has lost.

A.J.

Re: Slightly OT Bloodthinners and woodworking

#8

Re: Bloodthinners and woodworking go together

GalenV

>With quad bypass that has three out of the four collasped I take the 75 mg Plavix and 325 mg aspirin along with eleven other drugs to keep me going every day. I needed to find something to keep me busy so started back working with wood and enjoy learning on the lathe. Yah I still forget and pound or push on something too much and turn every color of the rainbow. I guess I never even worry about cuts in the shop as I have more shaving. I just don't scratch anything!

Been in the emergency room for a nose bleed that took 1 1/2 hour to stop and had them a little worried and it had nothing to do with woodworking.

The blood thinner they gave you by injection does not have a very long effect as I was given that too and if they need to do more surgery it was not going to be a big problem.

I could use a good wooden heart if you want to make one!

Happy Woodworking

Galen

Re: Slightly OT Bloodthinners and woodworking

#9

Re: Slightly OT Bloodthinners and woodworking

Charlie Self

>I've been on Coumadin--AKA warfarin, or rat poison--for about eight years now. Currently, I'm on 10mg four days a week, 8mg three days.

Yes, I bleed a bit more, so sometimes large splinters or small slices cause a bit of a mess, but otherwise, it's not a big problem. I am more careful, but that's partly because of aging, which makes me more careful, as well as less well coordinated (and I wasn't a star to begin with).

Re: Slightly OT Bloodthinners and woodworking

#10

Ric Taylor

Re: Slightly OT Bloodthinners and woodworking

Ric Taylor

>Randy,

About 20 years ago a major medical study was done that concluded everyone should take an aspirin each day (especially men) to reduce the chances of several ailments from high blood pressure to heart disease. Amid much fanfare and publicity, it became common practice for millions of people in this country to take an aspirin daily as cheap medical insurance. In recent years, that recommendation was reduced to baby aspirin. My wife and I are among the many who have taken the daily aspirin for many years (I started the day the study was announced in the national news media), although she did switch to baby aspirin a couple of years ago.

Now my wife is a Leukemia patient. Fortunately her doctor is one of the top oncologist/hematologists in the country. One of the first questions he asked us on the first day was why was she taking baby aspirin daily? We quickly and clearly learned that he is on a major campaign to get people to stop taking daily aspirin unless it is medically necessary, because of the blood-thinning effects. We both stopped immediately.

Ric

Ric

Re: Slightly OT Bloodthinners and woodworking

#11

Re: Slightly OT Bloodthinners and woodworking

Fred Davis

>Randy ,

Pain medication and drugs for Arthritis like Celebrex which I take all of every day are a way of life, don't sweat it, better that then a clot or untreated pain.

Now for the bad part , I am having a Colonoscopy next month and I have to stop taking all of them a week in advance of the procedure. Oh the Pain of it all , if I didn't know better , I would think a sadist was in the mix somewhere. ;-))

FredD

Re: Slightly OT Bloodthinners and woodworking

#12

Re: Slightly OT Bloodthinners and woodworking

John Luke

>Well this is some what close to the main subject of medications and woodworking.

Would Viagra give you better wood?

Re: Slightly OT Bloodthinners and woodworking

#13

I've turned some bloodwood pens! :-)

GalenV

>

Re: Slightly OT Bloodthinners and woodworking

#14

Thanks to all....

Randy Johnson Connersville IN

>You have put my mind at ease by saying what I already thought anyway. I just wanted confirmation. As someone who, up to a few months ago, could go for months without taking so much as an asprin, my knowledge of matters medical is a little sketchy. The sudden requirement of daily medication has been a bit of a lifestyle adjustment. Hopefully the need for bloodthinners is a temporary thing. A few other things showed up in the lab work I had before the surgery and I will be dealing with them from now on. The plus side is that I am finally being FORCED to do some things I should have done years ago.

I've been using power tools since the day grandpa let me use the jigsaw (what everyone now calls a scroll saw)for the first time when I was five or six. Since then I've only been bit REALLY hard once, a router table misshap that forced a trip to the ER. That first accident took almost fifty years to happen. If I can work as safe the second fifty years I should be alright.

Re: Slightly OT Bloodthinners and woodworking

#15

Re: Slightly OT Bloodthinners and woodworking

Bill White

>After the docs scare ya to death, just take the meds (Coumadin, sodium warfarin, etc.) and get on with your life. I still don't understand why I can't just drink whiskey and take aspirin. Seems to me that the results are the same. If you cut yourself, you'll bleed.

I take 10mg warfarin/dayBill

Re: Slightly OT Bloodthinners and woodworking

#16

Re: Slightly OT Bloodthinners and woodworking

Fred Davis

>John , I don't know about "better" , but I am told it would be harder. ;-))

FredD