Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Compound miter angles

Posts

Compound miter angles

#1

Compound miter angles

Jeff

>I've found formulas, charts and even someone who has come up with an Excel spreadsheet program to detirmine miter and bevel settings for cutting compound miters on a table saw.

My question is this: is there a way to set the miter gauge and bevel without having to use a chart or a calculator?

Yes, I could just make a jig that will hold my moldings upright and then just use my miter saw or tablesaw to make the cuts; but, these won't work if my workpiece exceeds the capacity of my saw blades. Besides, I keep hoping that there's a simple way to set everything up.

Thanks for the advice,

Jeff

Re: Compound miter angles

#2

Re: Compound miter angles

Ed Mulligan, Cape Cod

>Jeff -

There's an article by Steve Brown in Fine Woodworking # 158 which describes a method for producing compound angle joints without math.

Ed