Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Anyone know if these are stop hinges? *LINK*

Posts

Anyone know if these are stop hinges? *LINK*

#1

Anyone know if these are stop hinges? *LINK*

Dan Mitchell

>I'm considering these for a small box I've made & I'm wondering if they are stop-hinges. The description doesn't say, so I'm guessing they're not, but they're perfect for this application otherwise. Anyone know if they're the ~90 degree stop variety?

TIA

Dan


http://www.rockler.com/product.cfm?page=21325

Re: Anyone know if these are stop hinges? *LINK*

#2

Re: Anyone know if these are stop hinges?

Richard Jones

>Dan,

Pretty sure they're not..............

Rich

Re: Anyone know if these are stop hinges? *LINK*

#3

Re: Anyone know if these are stop hinges?

Greg

>No. These are.

http://www.rockler.com/product.cfm?page=9833

Re: Anyone know if these are stop hinges? *LINK*

#4

Re: Anyone know if these are stop hinges?

Dan Mitchell

>Greg - Yeah I've looked at those, was hoping to find something a little less expensive than $28! I got a set of their thin, stamped brass hinges, one was so loose as to have slop, the other was so stiff you had to force it to open & close.

Thanks for the replies.

Dan

Re: Anyone know if these are stop hinges? *LINK*

#5

Re: Anyone know if these are stop hinges?

Fred Davis

>If you can get a Brusso style and quality hinge with stamped steel prices , let me know,

FredD

Re: Anyone know if these are stop hinges? *LINK*

#6

I'm not asking for that

Dan Mitchell

>but you'd think you could get a decent, small hinge for less than 28 bucks.

Re: Anyone know if these are stop hinges? *LINK*

#7

Re: I'm not asking for that

NickTuzzolino

>Dan, Sorry to say that's mostly the way it is. I recently made four jewelry boxes and ended up spending over $100 for hinges. The Brussos are among the very best and for heirloom boxes and such, it is worth it in the long run.

Re: Anyone know if these are stop hinges? *LINK*

#8

Re: I'm not asking for that

George@Colonel's Workshop-Havertown PA

>Good Evening Dan,

I feel the same way. I recently had to buy stamped steel hinges for a coffee table in lieu of the beautiful brass ones which were much too much. While I know metals are very expensive now, I can't see how two bits worth of brass can cost that much, no matter how polished and "crafted". Making do with the stamped steel will be fine for most purposes, and may well be the smart way to go.

George

Re: Anyone know if these are stop hinges? *LINK*

#9

If someone had just handed me a couple

Dan Mitchell

>of the Brussos and asked what I thought they cost, I'd probably have said "Uhh, hmmm, Idunno, 10, 12 bucks, tops?"

And even THAT would only have been because you know that whenever someone asks you such a question, it's because the price is eyebrow-raising! ;-)

In any case, you'd sure think there'd be a price point between the $2.99 piece of crap, and the $30 "Rolex of Hinges".

The box in question is a gift for my MIL. I've been putting off finishing it because 1) decent stop hinges seem to cost so much, and B) I'm afraid of HOSING the bloody thing at the last minute with the hinge installation, but unfortunately III) time is running out!

Guess I'll bite the bullet and go for the Brussos. Got a "$20 off a $50 purchase" Rockler coupon I can use. Just have to find something to add the extra $22.

I'm sure I can come up with SOMETHING... ;-)

Dan

Re: Anyone know if these are stop hinges? *LINK*

#10

Buy 2 pair. Save $10 each

Barry Irby

>

Re: Anyone know if these are stop hinges? *LINK*

#11

Re: I'm not asking for that

Fred Davis

>George,,

it's not the cost of the metal that seperates Brusso hinges from stamped steel ones. it's the fact that they are machined from a block of brass, not stamped or cast and the knuckle tolerences are extremely fine and the quality control is the best I have seen for that type of hinge.

Now if you want to talk costly Brass hinges , buy some Gerber liftoff cabinet door hinges, my wife is still flinching about the ones on her China hutch.;-))

FredD

Re: Anyone know if these are stop hinges? *LINK*

#12

Re: Anyone know if these are stop hinges? *LINK*

Jim Dillon

>Dan,

The best price I've found for Brusso hinges is from Tools for Making Wood. The prices are for a pair of hinges, and if you order four or more pairs, you get a 10% discount. Don't know if their sizes fit your needs. Beall Tool makes a solid brass hinge with removable stop for $16, but the design is completely different (round vs rectangular) and goes on the exterior rear of the box. They are nice though. I've had excellent service from both vendors.

Jim


Brusso Hinges