Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Prescription safety glasses

Posts

Prescription safety glasses

#1

Prescription safety glasses

Tom Dunlap

>A while ago this topic came up. There were a couple of companies that made proper wrap around safety glasses that met ANSI Z87 standards in generic prescriptions that didn't cost a lot.

Most of the time it seems like it costs hundreds of dollars to get the glasses made in a decent frame. I remember seeing them listed for under $100.

A friend of mine told me that most generic prescription lenses are made using injection molding. Then the lenses are checked and sorted by prescription. After that it isn't any more difficult than finding a frame and popping in the lense. Super cheap if the user didn't need an exact lense or was lucky enough to have generic vision issues.

Does anyone have a link?

Re: Prescription safety glasses

#2

JL

Re: Prescription safety glasses

JL

>Try Wally World. I got a reasonable pair there a while back. I think the frames (really "fashionable" - not) were $65. The polycarbonate lenses weren't that much.

Re: Prescription safety glasses

#3

Re: Prescription safety glasses *LINK*

John K Jordan

>Tom,

Do you need significant astigmatism correction and/or is your vision far different in one eye compared to the other? Those are the best reasons I can think of to pay for prescription shop/reading glasses over generic simple correction.

I've bought many pairs of normal reading glasses (usually about $60 per lens plus frame) and although I think they are worth the money for my computer glasses and primary reading glasses, I find the cheap readers from walmart or the dollar store fine for shop use even though I have astigmatism. These glasses are only $5-$14 and are on a display of various powers to let you try them.

When I ordered prescription safety glasses, the only difference I could tell (besides a sturdy frame) was the use of one plastic over another and added side shields.

Assuming you don't want the cheaper bifocal wrap-around safety glasses, I found a bunch of companies with a quick Google search. One that looks pretty good is in the link below, most well under $100.

JKJ


prescription safety glasses

Re: Prescription safety glasses

#4

Re: Prescription safety glasses

Ken Garlock, Collin County Texas

>Hi Tom. I just order my standard prescription made up in a polycarbonate or what ever is being used these days.

I KNOW they work!. This summer I was cutting a tenon on a 3x3x24 piece of hard maple, and I didn't have the end tightly clamped in the tenoning jig. In what seemed like a fraction of a second, the piece came loose and the blade lifted tenon and intern the cast iron jig out of the miter slot. The next step was to quickly throw the piece at me. It hit me in the gut and left what appears to be a permanent mark. At the same time the other end(?) sporting a completed tenon whacked one lens of the glasses, knocking it somewhere in the shop. A couple days later, I found the lens and the spot of impact looked like a miniature bomb crater. I was darn lucking to not have a damaged eye.

Lesson learned: make sure all clamps are tight! Second always insist on good impact resistant lens.

I don't see the need for a separate pair of glasses, and unless your work place requires the wrap around, I wouldn't bother with it. You may be different, but when I run a tool, I want to see exactly where my hands are and what the tool is doing, hence the side impact is not an issue.

Just another thought....

Ken

Re: Prescription safety glasses

#5

I didn't have cheap safety glasses

Bruce, a MN Galoot

>when I got whacked. I had OSHA approved frames, and graduated bifocals with a significant amount of astigmatism correction and none of that comes cheap. That's okay.

I was doing something dumb - isn't that how these stories all start? - cleaning a lawn mower blade by holding the blade in one hand and scraping it with a screwdriver in the other. The screwdriver slipped and the corner of the mower blade rotated and whacked my left lens precisely in the middle. The glasses did their job and there was no damage at all to my eye. Damn good thing, too, because the force of impact would have taken my left eye. I now don't care what the glasses cost.

Bruce

Re: Prescription safety glasses

#6

For work protection...

Tom Dunlap

>Ken,

That's a scary story and enforces why glasses are worn.

I make my living as an arborist so there are hazards coming at me from all directions. The more protection I can have the better. Some of my buddies have 'dress' glasses but need eye protection that passes ANSI Z87 standards.

The link that was posted was really helpful, thanks!

Re: Prescription safety glasses

#7

Re: Prescription safety glasses

Robby Wright

>I get my ANSI Z97 glasses from Walmart. They have all kinds and actually charge less for some of the safety glasses than for regular glasses. I found a certified frame that looks good enough and is so comfortable, I just use it for all of my sets of glasses. They have slip-on side shields for when I want maximum protection and have outlasted normal frames three to one.

The pairs I wear everyday are expensive because of the bifocals and special coatings I get, but Walmart starts them well under $100.

Re: Prescription safety glasses

#8

Re: Prescription safety glasses

Bill White

>If you just need diopters, FastCap has 'em. Grizzley too.

Bill

Re: Prescription safety glasses

#9

Re: Prescription safety glasses

Ron Jones

>I have prescription safety glasses with no line bifocals, polycarb lens, safety frames and side shields from Sam's Club. $150 about 2 years ago. Love them!