Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Primer on upholstered furniture, help?

Posts

Primer on upholstered furniture, help?

#1

Primer on upholstered furniture, help?

Barry Irby

>My cousin tore apart an upholstered chair. What she found was just short of amazing. The frame was built of 7/8" plywood that looked like it might be roof sheeting in another incarnation. The mortices were done with a router (CNC) and to avoid having to trim the corners they over cut them along the short dimention so that they look like an "I". The chair had been wet, so the metal parts were rusted. I guess you could call it crude but effective.

Now she wants WE or US to build some new and different chairs. I will help with the frames and she will do the upholstery. What I need is a short course on frames for upholstered furniture. I have some experience with other furniture but none with the upholstered version. Can somebody point me toward a book, web site, Utube video or something so we don't have to re-invent all of it on the fly? Otherwise I might get out the big framing nailer and have at it.

Re: Primer on upholstered furniture, help?

#2

JL

What style are you trying for?

JL

>It does make a difference.

Re: Primer on upholstered furniture, help?

#3

I found this site to be Extremely helpful *LINK*

Tim Greif - West of Chicago

>When LOML and I did some upholstery a year of so back, we lucked onto this site that has an unbelievable amount of upholstery instructions. Not sure if it's what you're looking for in terms of framework, but for anyone considering DIY upholstery, it's chock full of info.


DIY Upholstery Instructions

Re: Primer on upholstered furniture, help?

#4

Re: Primer on upholstered furniture, help?

Tony - Memphis

>I built an upholsterd settee a few years ago. I looked at multiple sources. I found an upholstery book at the local fabric store. I ofund several pictures of frames (antique wing backs) in my woodworking book library, etc. I suggest you talk to an upholsterer to get some tips. Stretcher bars are important! I did my own plan and it worked out pretty well. I used poplar. I took it to an upholstery shop for that part. Too involved for me and I don't have the tools to do it. I've done simple slip seats, stools, etc., but this one was quite involved. Sorry I can't offer a specific source, but I just took a little from here and there and put it all together.

Tony


img

Re: Primer on upholstered furniture, help?

#5

Re: What style are you trying for?

Barry Irby

>Don't know what to call it, but the chair we started with had rolled arms on it and she wants to cut those off. So what we will end up with is pretty cubic. Back straight up and down, taller than the arms and the arems will be straight sided. Sort of as if the seat were a rectangular solid with two slim (thin) slabs on each side for arms, maybe 3" thick and the back taller and maybe four inches thick. The back cushion will have some taper to it so you lean back slightly when you sit.

Re: Primer on upholstered furniture, help?

#6

JL

Re: What style are you trying for?

JL

>Barry,

there is a good intro in Robert Lang's Shop Drawings for Craftsman Furniture books.