just getting started
lynnharley
>I have just retired and am starting to get into woodworking. I would like to know the best placed to buy used woodworking tools
Knowledge You Can Build On — Est. 1998
just getting started
lynnharley
>I have just retired and am starting to get into woodworking. I would like to know the best placed to buy used woodworking tools
Re: just getting started
Dale Lenz
>Found my table saw from the classifieds in the newspaper. Jointer at an auction, lathe at an estate sale, miter saw at the store. Hand tools online, eBay, wood-stores etc. Planer from a magazine ad. Get them where you can. Might try during the week auction, since you have the time(?). Good luck and enjoy your retirement.
Re: just getting started
john lucas
>If you have Local Sales Network in your area check that out. I check it on the computer weekly. I just found a compressor there. Also follow the yard sales and auctions in your area. I just bought a welder, router crafter, and horizontal bandsaw through those.
Re: just getting started
Bill Tindall, E.TN
>1. Join and be active in a club. There is a lot to learn and books are not the preferred route to this learning.
As far as tools- local paper, Craig's list, WoodCentral Classified, ebay.
Common used woodworking tools are readily available.
Re: just getting started
steve mackay
>I tend to troll the pawn shops here. Once in awhile you hit on a good deal. If the shop is "stand-up" they have tried it out before they take it in. Just be sure YOU try it out before you buy also.
Re: just getting started
Al Kapocius
>If'n you have time, wait for the flea markets to pick up the odd small piece. Check the Hand Tool forum for additional suggestions.
Al Kapocius
Re: just getting started
Gene Gauss
>Craigslist. Avoid sight unseen purchases of used equipment by staying local and shipping charges if you can transport yourself. I've done well generally on C/L.
Re: just getting started
George@Colonel's Workshop-Havertown PA
>Good Afternoon Lynn,
I've bought and sold some nice tools on the local Craig's list. In this area of SE PA, its helpful to go there several times a day. Almost any type of tool will show up in reasonable time. Its best that you know price/value, so don't jump too soon. Look at other sources and on-line to get a good idea of new and used values, features and capabilities. Buy the tools you think you will need first, and use them. You will soon recognize what you need next, and then in what order. Don't buy a BMW when a Ford will do, but do seek higher end items at a reasonable price. Good luck.
George
Re: just getting started
Fred Davis
>Lynn ,
all of th usual places to buy tools have been noted , but it seems to me that knowing what area of woodworking you will want to work in would be very helpful in picking and choosing tools.
Woodworking as a genre covers a lot of territory and many find a niche they are comfortable in and then they become focused on that aspect.
Then there is the on going discussion on which is better , handtools or powertools.
I use both because of time constraints and having a disposition that will not tolerate less then what I think I am capable of.
So given that notion on the craft I use a jig and router for dovetails because it is faster , perfect every time and not really the part of the project I want to show off.
So , what would you like to make? ;-))
FredD
Re: just getting started
NickB in Eastern Mass.
>The classifieds portion of this site is a good source (I've bought a number of small tools, a 14" planer and a scroll saw, and happy with every purchase), but for large equipment it may not help much, as few people are interested in either packaging a large machine for shipment or paying the shipping charges.
Ebay has been reasonably good to me as well (Rojek PK300V and a Bosch jigsaw that I bought to put a Collins coping foot on). Just watch the shipping costs.
Good luck (and patience) to you,
Nick