Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

twig pots

Posts

twig pots

#1

twig pots

Tom Russell

>I have a bunch of wood left from an ice strom last Dec. It has been outside. I need a guidlne for how and when to turn it into twig pots. I know I can make bowls green, but what about twig pots? Any advice?

Re: twig pots

#2

Re: twig pots

Carol - now back in Dubuque, IA

>Best to post over on the turning side.

Look to your left for the turning board/

Re: twig pots

#3

Re: twig pots

John K Jordan

>Yes, ask on turning, but I've made them from a huge variety of woods. Green wood can warp more, but weed pots are usually done with the grain running the long axis so warping is not as much a problem, AND if it does warp it may not matter much with the small diameter and no lid to fit. There may be more of a problem in finishing and keeping a nice finish. Fortunately, small diameter weed pot blanks dry pretty quickly and seldom crack. It the winter time I lean small turning blanks against the wall behind my wood-burning stove.

JKJ

Re: twig pots

#4

Re: twig pots

Barry Irby

>I agree with the others. Turn them and finish them. Small pieces like twig pots should be fine.

To get to the Turning Forum put your cursor on "Message Boards" (to the left), wait for the fly out or drop down menu and the second one down should be Turning.