Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Anyone know of...

Posts

Anyone know of...

#1

Anyone know of...

Ray Newman

>a manufacturer making tray/drawer glides that lock in place when fully extended?

The Squeeze came home from a quilting show & told me about a small cabinet that held a small ironing board on a pull out tray that locked in place. She claims it would be just the ticket for ironing the small doll clothes & quilt pieces. She really liked the cabinet, but not for US $400.00 +

Re: Anyone know of...

#2

Re: Anyone know of...

John Veerkamp, Western Mo

>Try Rockler. They have plans for sewing cabinets, sewing machine lifts and ironing board hardware. They might have what you're looking for.

John

Re: Anyone know of...

#3

Re: Anyone know of...

Jim Pugh, Elyria, OH

>Suppose you made a small pivoted lever with an "L" shaped end that would ride on top of the drawer side until it reached max extension then would drop down behind to lock it? Just lift it up to push the drawer back in.

Re: Anyone know of...

#4

Re: Anyone know of...

Carol - now back in Dubuque, IA

>Google keyboard slides with a locking feature. I've used them in the past but never for an iron. Cool idea.

Re: Anyone know of...

#5

Re: Anyone know of... *LINK*

Grant Wilkinson

>You may want to look at this link to Lee Valley.


locking slides

Re: Anyone know of...

#6

Re: Anyone know of...

Rob Hix - King George, VA

>Ray,

Last year sometime I ordered "hold open" full-extension drawer slides from Lee Valley. They work great. Here is a link:

http://www.leevalley.com/hardware/page.aspx?c=2&p=52491&cat=3,43614,43616&ap=1

Once open, these things require probably 8 to 10 pounds of force to start them closing.

Good Luck,

Rob Hix

Re: Anyone know of...

#7

Re: Anyone know of...

Chuck in ND

>I bought one from Menards quite a few years ago that has a metal interior cabinet with a unfinished oak raised panel door. It is wired up for a light and outlet inside, with a place to store the iron also. I recessed it into the wall. I'm sure it wasn't anywhere near $400 or I wouldn't have bought it.

Re: Anyone know of...

#8

Re: found some at.....

joe aiello

>I got some from the scrap yard.They were used in computer racks to hold electronic devices(computers and telephone equip).Some had a slide within a slide so when extended it was out 30-40 in locked position from 24in closed. Easier to do maintenance I suppose. I wanted the rack to use as a work bench;relocated the casters to the bottom,open sides and top.Great for clamp station,movable work area,etc.

Re: Anyone know of...

#9

Re: Anyone know of... *LINK*

Jim Dillon

>Ray,

Here is the real-deal at Woodworker's Hardware. My paper catalog shows a picture of the pull-out with enough detail that I bet you could make one with ordinary full-extension lockable drawer slides. The ironing board itself appears to be hinged so it will fit into a regular depth cabinet. Pretty neat. FWIW, I have had good luck with Woodworker's Hardware in the past and their catalog is well worth having on hand. Hope this helps.

Jim


Ironing Board Center