Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Differential finishing and pine - concerns?

Posts

Differential finishing and pine - concerns?

#1

Differential finishing and pine - concerns?

Scott in Douglassville, PA

>Hi, all -

I'm close to gluing up the waist of the Dominy clock project. I'm debating on finishing the interior. If I do, I'll want to do that before gluing up.

The wood's old white pine, pretty knotty. The exterior of the clock is likely to get either a semi-transparent stain or (more likely) oil based paint. For the interior, all I want to do, if anything, is spray on Zinnser Bull's Eye shallac (which isn't dewaxed, I know - shouldn't be a problem, though). Here's the debate, though - for boards less than 10" wide, should I be concerned about cupping from differential finishing and uneven moisture absorption? I'd really rather leave the interior raw - smells nice and looks better.

Lemme hear it.

Thanks,

Scott

Re: Differential finishing and pine - concerns?

#2

No problema either way

Clint Searl, at the base of Haycock Mtn

>

Re: Differential finishing and pine - concerns?

#3

Re: Differential finishing and pine - concerns?

George@Colonel's Workshop-Havertown PA

>Good Afternoon Scott,

I agree with Clint. The backs of the clock bonnet, waist, and base are small enough that differential finishing won't matter, as it might in more expansive panels.

George