Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Cabinet construction w/ prefinished plywood

Posts

Cabinet construction w/ prefinished plywood

#1

Cabinet construction w/ prefinished plywood

Chad Pearson

>I am about to build new cherry cabinets for my kitchen. I would like to use prefinished maple plywood to keep the interiors bright. I would like the exteriors to be cherry. This is no problem for the front of the cabinet because of the faceframe and door. However, in my layout there will be some exposed sides and backs.

I saw that the local blue borg carried cabinets that appeared to have been made from a plywood with maple on the interior and cherry on the exterior. It does not appear that my local suppliers carry anything like this.

I am curious to know how others would handle this problem. Would you simply tack on some 1/4 inch cherry plywood on the exposed pieces or would you attempt to veneer a sheet of cherry on top of the maple? It seems like either method may create problems with the plywood becoming "unbalanced" when attached/glued.

Re: Cabinet construction w/ prefinished plywood

#2

Re: Cabinet construction w/ prefinished plywood

Dick Coers

>I know that some companies attach an end panel to the box. In some cases, it is basically just another door. You can buy cherry "door skins" that are 1/8" plywood, or also prepared cherry veneer that has the backer applied and usually pressure sensitive adhesive. If you want a harder skin, you can get cherry veneer with a phenolic backer so it would be like applying "formica".

Re: Cabinet construction w/ prefinished plywood

#3

Re: Cabinet construction w/ prefinished plywood

Dave Bair, Eaton Rapids, MI

>Make just the backs, bottoms and tops from the prefinished maple; it'll brighten the interior and catch most of the light entering the cabinet. Cherry sides will not look that odd, even though they meet the white maple.