Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Refacing Cabinets

Posts

Refacing Cabinets

#1

Refacing Cabinets

scotty3179

>I am looking for anyone that has refaced kitchen cabinets. I plan on doing that to our cabinets in the future. Just getting all my ducks in a row. I think that I have the jist of it, but there is always tips to learn. Is there a good book that deals with this and the tricks of the trade. Anyone let know.

Re: Refacing Cabinets

#2

Re: Refacing Cabinets

Fred Davis

>Scotty, I don't know about books on the subject but is pretty much of a racket in California.

What I do know , after a bunch of work you still have the same layout and old boxes and drawers.

FredD

Re: Refacing Cabinets

#3

Re: Refacing Cabinets

Frank Mutchler

>Scotty, if the layout is satisfactory & the boxes are sound, go for it. You can turn a dark, dull, & drab kitchen into bright, inviting, & refreshing kitchen.

I refaced a large kitchen for a widow....I don't remember how many but at least 25 boxes. I used maple veneer for all the exposed sides and built new raised panel doors & drawer fronts using spalted maple. It came out very nicely and totally changed the affect of the kitchen.

If any drawers need replacement, it's not that difficult to build new ones. Veneering is fairly labor intensive. As I recall, I used 1/8" veneer, not the paper backed variety, and applied it with brushed on contact cement and a veneer hammer/spatula.

Re: Refacing Cabinets

#4

Re: Refacing Cabinets

Steve in Denver

>Rockler has some supplies, tools and books for this.

http://www.rockler.com/search_results.cfm?filter=refacing

Re: Refacing Cabinets

#5

Here's an idea

Clint Searl, at the base of Haycock Mtn

>When I redid our kitchen, I just painted the oak face frames and side panels, and replaced the standard doors and drawer faces with river recovered solid cypress, adding new hinges and hardware.

Clint


img

Re: Refacing Cabinets

#6

Re: Refacing Cabinets

Pete LaBelle

>Did mine about 10 years ago & love it. Built the raised panel doors myself from wood cut on my dad's land. Overall refacing project cost about $700 or so.

Lessons learned:

1) Hunt around and buy 1/8" door skins to clad the cabinets. The thin edge of the skin (3 ply plywood actually) is hardly noticable in the openings afterwards.

2) Clean & rough up the surface to accept some wood glue & attach with small brads.

3) Cut & attach the skin pieces like the cabinet face frames were built. You can put the whole sheet on and route the door openings, but the grain looks wierd.

4) Before you start the new wood application, paint the interiors a color similar to the stained wood you will use. Brightens them up & you can finally see the back of the cupboard!

5) Repair/reinforce any drawers before you start rework.

6) Now's the time to move any cabinets to create a different layout, or add a couple new ones found at a salvage store. Once in place, continue the painting/cladding project.

Have fun !

Re: Refacing Cabinets

#7

Re: Refacing Cabinets

Jerry Samsen

>I did mine. I recommend a book you can get from Rockler called Kitchen Refacing that goes through the entire process.

I used peel and stick veneer (cherry) with contact cement on the face frames and 1/8" cherry ply for the side panels. Very easy to apply.

Build new doors and drawers with new slides. Use Euro cup hinges if you don't already.

If you are happy with the layout of your kitchen and the carcasses are solid it is a good way to go.

I even replaced the bottom (floor) of the boxes with 1/8" maple ply to improve the look of the cabinet bottoms.

Since the veneer folds over 3/4" to the cabinet bottoms and folds over the face frame, unless you look very very closely you would think they were solid cherry face frame.

It is not a scam. The only scam is the amount a contractor will charge for something we woodworkers would think quite simple.

Re: Refacing Cabinets

#8

Re: Refacing Cabinets

Fred Davis

>Jerry,

I never said cabinet refacing was scam, I said it was a RACKET in California , the difference being, in a scam you pays your money and get nothing, in a RACKET you pays your money and get considerably less then advertised.

Since I had many kitchens won on bid after Sears had been there first with their estimate, it was simply this,

Sears advertised a "Kitchen like New " for less then a remodel and then went on to charge much more then the Hardwood cabinets I custom made for the kitchen and furnished Tile set in mud instead of a Sears Formica top and a cast iron sink instead of a cheap stainless (24 Ga.) one and made a good profit.

Not to mention 100 lb. rated drawer sides, choice of woods, design, colors and so on.

In the Sears job not only was the material used cheap , the workmanship was criminal and you wound up with the same old layout , drawers and boxes , regardless of how you describe it , that's what you got for more then the price of a new kitchen.

That's called a racket out there and the consumer affairs dept. thought so and so did the prosecutors in the Attorney Generals office.

FredD

Re: Refacing Cabinets

#9

Re: Refacing Cabinets - Refacing - Refacing

Jerry Samsen

>Thanks for the explanation.

On a related topic.

That was 10+ years ago and now the kitchen is starting to show wear. I may build all new cabinets but also considering refacing again.

Has anyone tried to reface a refaced kitchen? The veneer would have to come off as another layer will not look good. I am imagining a nightmare trying to scrape / pull off the original veneer. It was peal and stick with contact cement on the face frames.