Handy drawer stop idea
Bill Tindall, E.TN
>I was going to title "clever drawer stop", but then I find that my cleaver ideas were usually already in use in 1725.
The problem is a shallow drawer on a wall cabinet. You know the problem with shallow drawers; they fall out when handled by strangers. I have never been smitten by the drawer stop arrangements I have seen employed. What you see in PIC 1 is the drawer with its cock bead and crotch veneer face, the top edge of the drawer and the face of the top rail. The pin drops into the hole through the top rail show in PIC 2 and projects so as to engage the drawer back and keep it from falling out. There is sufficient clearance to push the pin up to release the drawer. The hole is 3/4 counter sink and 7/16 bore. The pin dimensions are 1/16 smaller. The total pin height is slightly less than the rail thickness.




