Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

OT Expansion Tank

Posts

OT Expansion Tank

#1

OT Expansion Tank

Sawman

>I have seen these used on hot water heaters. When and why are they necessary?

Re: OT Expansion Tank

#2

Jim DeLaney, Austintown, Ohio

Re: OT Expansion Tank

Jim DeLaney, Austintown, Ohio

>They're needed when you have an anti-backflow device, or a pressure regulator in your water supply line. The hot water expands, and if it can't flow back into the supply, raises the pressure in the closed system.

My incoming supply from the city is 135psi, so I have a whole house regulator totake it down to 60psi. Without the bladder tank, the pressure will back up high enough to pop the pressure valve on the water heater. With the expansion tank, it stays under 65 psi.

Jim D.

Re: OT Expansion Tank

#3

Re: OT Expansion Tank

RobV

>I have only seen them used with tankless hot water heaters.

Re: OT Expansion Tank

#4

Re: OT Expansion Tank

Greg

>I have one on an in-floor radiant heat system that uses a boiler to heat the water.

Re: OT Expansion Tank

#5

Re: OT Expansion Tank

Robert R Clough - Thorncraft

>As we have a boiler and use hot water and radiators to heat with, we must have such a tank for the hot water to expand into. Our service man drains it when needed.