Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Replacing a Jet Jointer Cutterhead

Posts

Replacing a Jet Jointer Cutterhead

#1

Replacing a Jet Jointer Cutterhead

Paul Woolson

>I just purchased a helical cutterhead for my 6" Jet Jointer. Can anyone point me in the direction of instructions showing how to replace this? Thanks in advance. Paul

Re: Replacing a Jet Jointer Cutterhead

#2

Re: Replacing a Jet Jointer Cutterhead

Doug Reynolds in Seattle

>I got the Byrd from Sunhill here in Seattle and instructions came with the unit. It was pretty intuitive once I removed the fence, guard and, lowered both infeed and outfeed tables. Unscrew two bolts and replace the entire unit with bearings. I believe you can download the instruction sheet from Sunhill. I don't know which brand you bought though.

Re: Replacing a Jet Jointer Cutterhead

#3

Re: Replacing a Jet Jointer Cutterhead

GalenV

>Jet jointer manuals are on the Jet web site and they show procedure for cutter head replacement. One would think your part would have came with some instructions as well but then you would not be asking.

Take a look at on line manual.

Re: Replacing a Jet Jointer Cutterhead

#4

Caution!!!!! Before you start this swap..........

Art Silva

>Buy a pair of puncture-proof gloves from our friend Rob Lee. They will keep you from turning your hands into chop meat, and they are great for handling rough cut wood at your favorite Mill.