Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

band saw guides------WebKitFormBoundarya6sr8yxrT6Q

Posts

band saw guides------WebKitFormBoundarya6sr8yxrT6Q

#1

band saw guides------WebKitFormBoundarya6sr8yxrT6Q

eliot d------WebKitFormBoundaryu+MBDi+0MX0Pf5O9---

>One of my band saws is the 14 inch Delta. At one of those woodworking shows I was impressed by the band saw wizardry of this lady who could turn all kinds of curly stuff -- sort of like a mechanical jig saw. I thought I would make puzels or whatever for the grand kids. So I purchased her band saw guide, and removed my original ones that came with the Delta. This new one has no side guides; the blade has low tension and rides against a slotted wheel. It works all right, but to tell the truth, I never got around to cutting anything curly and fancy with it. Should I go back to the original guides, or leave it alone?

------WebKitFormBoundarya6sr8yxrT6QS+pRh

Re: band saw guides------WebKitFormBoundarya6sr8yxrT6Q

#2

Re: band saw guides------WebKitFormBoundarya6sr8yx *LINK*

John K Jordan

>If it is the Carter "stabilizer" or one like it with a little groove in the bearing for the back of the blade to ride in, you are supposed to remove it and put the original upper guides back for all sawing except for tight curves with very small blades (1/16"-1/4") It doesn't have the side support needed to keep the blade straight for other cuts.

JKJ


http://www.carterproducts.com/product_list.asp?cat