Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

OT - I was worried, but it worked fine!

Posts

OT - I was worried, but it worked fine!

#1

OT - I was worried, but it worked fine!

Scott Greaves in Blackfoot Idaho

>I cloned my "C" drive, and then switched it out for a bigger drive!

My Dell computer came with, what was then a massive, 40gb hard drive. A while later I added a 200gb drive as an "F" drive. A couple of weeks ago I was looking on Ebay for a big hard drive for my Xbox and came across some 320gb IDE drives for $57 each, so I got two, the second one for my computer.

My plan was to make the 200gb drive my "C" drive, and install the 320gb drive as my "F" drive, but I didn't want the hassle of re-installing any software. I asked around, did a little research, and it seemed that the piece of software that was recommended most often was Acronis True Image. I found it on Ebay for $30, which if it worked, would be worth it.

So yesterday I had a little time to try it out. I had already installed the Acronis software when I got it. I deleted everything off my "F" drive, and then fired up the Acronis. It was very intuitive and led me through the process of cloning my drive. When it was done, it shut down my computer so I could remove the old 40gb drive. I moved the 200gb drive into it's place, and put in the 320gb drive.

I fired everything up, and it worked just perfect! When the system came back up, I went into the Acronis software, and chose the option for adding a new drive, and it took care of formatting and partitioning the new drive, no sweat! It all just worked with no hitches! And now I have 500gb in my computer, which hopefully will keep me going until Vista's successor comes out.

Just thought I'd let everybody know, because I know many of us here work on our own computers. I have no affiliation with the software company, other than as a happy customer.

Scott.

Re: OT - I was worried, but it worked fine!

#2

Re: OT - I was worried, but it worked fine!

Dan Mitchell

>Scott - Sounds like everything worked out great, good to hear it. I build my own pc's, my current one has 6 hdd's 4 SATA's and 2 older IDE's I had from my previous machine, for a total capacity of around 2 TB. I use my machine for multi-media & have a ton of music, video & even print material stored. I'll probably replace the IDE's at some point with SATA's in the 750GB to 1TB size range.

Working on your own machine is fun & rewarding, as well as a lot cheaper than buying pre-built or paying someone else to do things like hardware updates for you. If you're not familiar with them, I suggest you check out the vendor NewEgg.com. They have a terrific inventory, as well as great service & pricing, frequent sale items/free shipping/rebate offers, and very useful "user ratings" on most of the things they stock. I see looking there, they have 320 gig Western Digital IDE's for $59.99. I don't know the details of what you found on ebay, the ones you got may have a larger cache, or be faster, and there are certainly good deals/dealers to be found there, but the peace of mind of a large, established vendor is also valuable.

Good luck with that machine!

Dan

Re: OT - I was worried, but it worked fine!

#3

building computers

John K Jordan

>>...I build my own pc's

Anyone else remember what it used to mean to "build your own", say, sometime in the mid 70's? Design the digital logic circuits, etch printed circuit boards, solder thousands of connections, wire rectifier bridges to transformers big enough to weld with, build cases from wood and sheet metal, THEN write your own software in assembler since none was available....

Good clean fun!

JKJ


img

Re: OT - I was worried, but it worked fine!

#4

Re: building computers

Dan Mitchell

>I never built any computer bits from the board-up, but I've built a ton of other electronic gear that way, starting with audio and test equipment while in high school in the mid-70's. Those were the days, taking the schematic, designing a pc board layout, often 2-sided, applying it to the copper-clad board with tape & dots, etching the board in ferric chloride, drilling all those little holes (especially fun with large IC's), etc. Great memories...

Dan

Re: OT - I was worried, but it worked fine!

#5

Re: building computers *LINK*

John McGaw

>Yes, I remember it all too well. Only regret is that I didn't keep any of my old computers. I'd love to fire up the old Poly 88 and see if I could read a program from an audio cassette. Not that I'd want to do my real computing that way but it sure did put a person in real touch with the computing process.

Then again, trying to read the 64-character X 16-line display off of the 9" Panasonic CCTV monitor I had might be a bit problematic with my eyes the way they are now.


Poly 88

Re: OT - I was worried, but it worked fine!

#6

Re: OT - I was worried, but it worked fine!

Rob Hix - King George, VA

>I have been using True Image for years for backup. Since you already have the software, keep using it for backups. I can restore my Windows XP machine from a backup in a little less than 15 minutes. Much quicker than reinstalling Windows.

I highly recommend the software. I also highly recommend doing periodic backups. Really helpful to have to recover from Viruses, and other bad things.

Rob Hix