Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E. Peacock

>3 Nov 2008

WOW!!! Is Thanksgiving and Christmas holidays getting here in a hurry! I guess the older I get the faster time flies by.

Well, I do have some good news to tell ya. I spent a LOT of time in the shop on Monday/Tuesday of last week!!!! It sure felt GOOD to be in the shop again and I should have the Walnut table top glued up today, the table skirt cut today, and the legs cut and glued up tomorrow. YEA!!!!

Oh..I did deliver an end-grain cutting board to a guy at work that wanted one of my end-grain cutting boards.

Other than that, I'm still recovering from working 17 to 18 hour days on my work week last week (Wednesday through Saturday). I had to do a software upgrade on 152 Unix servers. This was by no means all of the servers I help support, but ones that control each specific environments data protection and recovery points. Needless to say that I'm "tired". Got done with the very last bit of work for the day job last night early and then I flopped in the bed. I just can't do long work days and weeks like I used to. I think age has something to do with it. Don't you?

Remember to Vote your heart and not your head this week!!!!

So what did YOU do this weekend?

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

Re: WC Weekend Accomplishments....

George@Colonel's Workshop-Havertown PA

>Good Afternoon Dennis,

I was on light shop duty this weekend. The major achievement was framing a mirror which our youngest daughter, #3, Mary bought from a yard sale. Its plastic frame was trash, and the whole mirror was priced accordingly. I developed a profile and milled cherry. I also inlaid a 1/2" strip of very curly maple. I had to build a spline jig, so I could join the pieces together in lieu of biscuits. With the second coat of shellac applied after two days of sunburn outside, it had turned out to be a very pretty object, the inlay is a wonderful contrast witht he reddening cherry. I also put up my drill press on Craig's list after a thorough cleaning and polishing. It looks as new. I need its space for a radial Grizzly press my son will buy for me in a couple weeks. We had a household of kids and grandkids for the party last night: 15 adults and 5 grandkids. One hundred tons of food! And enought beer to replace Lake Ontario's volume. Glad to read you are resting after your demanding schedule. Post a pix of the walnut table. Have a great week Dennis. Charlie says "Hello"

George

Re: WC Weekend Accomplishments....

#3

WC Weekend Accomplishments....and a weird part

Charles Yawn

>Worked on the finishing part of 16 scroll-sawn wooden puzzles for a charity auction. This phase was smoothing the final lacquer coat lightly with 0000 steel wool. Took about 2-3 hours to work all the pieces and used up four wool pads.

Now a weird part: I have cochlear implants for both ears to help me hear. These implants work, partly, with a fairly strong magnet that attaches a transmitting coil to the scalp. This morning as I was putting the CI devices on, I noticed a good bit of black fuzzy stuff on the magnets. It was steel wool. You ever try to get steel wool dust off a small, strong magnet? What bothers me the most is that these magnets are mounted just slightly above and behind the ears, so this stuff was floating all around my head, nose, mouth and eyes. Yuck!

A respirator and doo-rag next time; or maybe a better setup would be to station a bigger magnet nearby to suck up some of the floating steel wool!

Charles

Re: WC Weekend Accomplishments....

#4

Bill Grumbine turning classes continue to rock

wilbur

>This weekend I went out to Bill Grumbine's shop for a lesson on turning beads with a spindle gouge. I got a lot better at it, and need to keep practicing, but something must have sunk in, as my ability to turn beads with a skew chisel got a lot better as well.