Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

OT - GM fan blower resistor update

Posts

OT - GM fan blower resistor update

#1

OT - GM fan blower resistor update

Joe Pack

>I had an appointment with my GM dealer today for brakes on my TrailBlazer. They are great about giving me information on simple things I do on my vehicles myself, so I ran the fan blower resistor problem by them. I told them about the AC Delco replacement part blowing twice, and about the different brand I had asked for instead of AC Delco. Based on info suggested here, I asked them to check the blower for proper voltage, etc., which they did. They found nothing wrong...concluded that my hunch was right in that I probably just got 2 bad parts from the same batch from the plant in Slovenia (so much for GM/North America, huh?). Since I had the third "new" resistor sitting in the front seat, they plugged the new one in and tested it too. Everything worked fine, with the proper voltage, amps, resistance on all settings. The 1/2 hour labor charge was totally fair and okay with me. All I have to do now is put the glove box and bottom back in the dash...6 screws and 10 minutes.

Related, I have to give kudos to this dealer, Bill Harris Chevrolet, Ashland, OH. I am 58 years old. In all those years I have NEVER trusted an automobile dealer. I have had them try to charge me $35 for a Dodge Colt oil filter ("It is a special part imported from Japan") that I bought for $7 at a box parts store. I have had them price a fuel filter replacement at $75 ("My technicians have specialized training.") that I had replaced at a private garage for $30. I have even been told by one dealer that they could not do an alignment on my car because the ball joints were worn out...the same ball joints I had replaced less than one month before that. But my dealings with Bill Harris Chevrolet have been nothing like that. Pretending total ignorance of certain things, I have asked questions there, and was told the straight, honest truth. Some minor things that were taken care of in just a few minutes, at little or no charge, would have been major costs at the dealerships I have referred to. I have heard them give the same straight information to many customers while I was waiting on my car. As far as I can tell, they are completely honest and want your business forever, not just for one sale or service. Companies like this should be commended, because, in my experience, they are few and far between.

I know most of you are nowhere near Ashland, OH, but, for those of you who might be, I could not recommend Bill Harris Chevrolet any more highly.

p.s. The Airtech brand blower resistor was also made in Slovenia. Probably the same factory, but a different lot number.

Re: OT - GM fan blower resistor update

#2

Note to Charlie Self *LINK*

Joe Pack

>Charlie, the blower resistor on your Stratus should not be too hard to get to or to replace. I found a link describing exactly where and how. My dealer quoted $125 or so to replace mine. I removed 6 - 8 screws, unplugged it and plugged in the new one. If I had not had the problem with the parts, my total cost would have been about $42.

Your part at RockAuto.com would cost about $25 shipped. The part is truly "plug and play" and should take about 1/2 hour to replace, most of that time being in taking the access panel and glove box off. At worst, your local corner garage would charge you for no more than an hour's labor. The $300 you were quoted was from one of the leeches I wrote about in the post above. The part is $25. The rest is labor (at $275 per hour???).

Check out the provided URL for where/how.


Stratus resistor replacement.

Re: OT - GM fan blower resistor update

#3

Re: Note to Charlie Self

Charlie Self

>Yeah, well, we've started taking the vehicles to a new mechanic, a younger guy who appears far more competent...he was lead mechanic at the local Chrysler dealer's until they appointed a new overall manager.

At my age, the 'get down and crawl under' part is out of the question, unfortunately. Three knee surgeries and an enlarged gut prevent any of that, while arthritic trigger fingers make the idea of holding screws or nuts and bolts almost laughable...when the fingers click and nuts'n'bolts scatter all over the place, screaming is more likely.

Thanks for the thought: I think this guy is going to charge under $150.

Re: OT - GM fan blower resistor update

#4

Charlie, are we related???

Joe Pack

>I have surgery for trigger finger scheduled for December 10, after my craft show season is over. For now, I hold the screwdriver/bit extension between my thumb and last two fingers. I have two knees that need scoping. I have an arthritic shoulder with a partial rotator cuff tear (the doc said, "You ain't a world class athlete. Live with it.") I look like I'm 11 months pregnant, but I can STILL crawl down and into the floor under the dash. The problem is that it takes half an hour to get back out, and then I had to lay on the couch all evening to let my back muscles relax enough to be able to scratch my own butt again!

Getting old ain't no fun...but it does beat the alternative, don't it??? :=_

Re: OT - GM fan blower resistor update

#5

Re: Charlie, are we related???

Charlie Self

>Hey, we're told it beats the alternative. To date, not a single proven instance of anyone coming back to tell us whether or not that's true.

Age is a funny thing (a lot funnier when you're young). Old keeps changing: when I was 30, I expected to do like most males in my father's family, and kick off around 60-61-62. Now that I've passed 70, I am looking at 80 as fairly youthful, at least compared to my 94 year old maternal aunt (who was still driving at 90, and may still be).

But fairly youthful and able to get under dashboards and do useful work are different things. The young(er) guy a few miles away is well worth his $48 an hour!