Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Very OT: Computer Network Question

Posts

Very OT: Computer Network Question

#1

Very OT: Computer Network Question

Scott Greaves in Blackfoot Idaho

>This has nothing to do with woodworking, other than part of it will be housed on the computer desk I made!

I recently acquired an Xbox, the original not the 360, and I want to tie it in to my home network and use it to store video I can then play on my TV. Don't ask - my Son talked me into this! ;-)

Anyway, I have relied upon wireless network for my home networking needs for a couple of years, but am now wondering if I should buy a switch and run a CAT 5 line for this device? It doesn't have wireless built in, although I understand wireless can be added to it. I'm just not sure it would be better. What do you think?

Also, if anybody has a way to retrieve shows recorded on my DVR and send them to other devices, such as in this case the Xbox, I would love to know how to do it! BTW, I do have a larger hard drive to put in the Xbox than the original 10gb it came with!

Thanks friends!

Scott.

Re: Very OT: Computer Network Question

#2

Wireless is too slow....

Mark Goodall - ATL - tooljunkie

>Wireless (old like the XBOX or newer like the 360) is still too slow for large data transfer. It's fine for (slow) internet connections, but I think it would drive you crazy for large data transfers like video.

A simple $20 10/100 switch will be faster than wireless, and a 1000 switch would be even faster, but the XBOX ethernet is only 100 IIRC. And a wireless connection for an XBOX is $80, unless you get one on eBay for $10 (since you can get the whole XBOX system for $40 in eBay) ;)

That being said, I've not done this with a XBOX so it's theory, not from practice.

Happy Woodworking!

Happy Woodworking!

Re: Very OT: Computer Network Question

#3

Jason Roehl in Lafayette, IN

Done it, but with a 360...

Jason Roehl in Lafayette, IN

>Right now, I have an XBOX 360 wirelessly networked with my desktop PC running WinXP Media Center Edition 2005. I can watch video saved on my PC on the LCD to which the 360 is attached. The bottleneck is not the 54 Mbps wireless-G router, but the 2.8 GHz/1 GB PC--it can't be used while watching video via the XBOX.

I have not attempted anything regarding pulling video from my DVR, though I'm sure I could do it (slowly and clumsily) through the DVD recorder hooked to the home theater, then rip it off the DVD on the PC. Nor have I tried to push HD video through the wireless network via the 360.

Jason

Re: Very OT: Computer Network Question

#4

Re: Very OT: Computer Network Question

Scott Greaves in Blackfoot Idaho

>Thanks Guys!

I think I'll go ahead and invest in a switch and some wire.

What my Son does is convert the video to an AVI file on his PC, and then FTP's the files to the hard drive on his networked Xbox, and then can watch them on his TV. The PC isn't involved while you're watching the show, but I do want an efficient way to transfer the files to the Xbox.

So, I can get a cheaper 10/100 instead of the more expensive 10/100/1000, huh? Thanks! That's nice to know!

I am not much of a gamer, but I got the old Xbox from my secretary for $5, and I invested in an IDE 320gb HD off of Ebay for $57, and a remote control for $6. So I don't think I'm out much if this doesn't work! And if it does work, I'll have ready access to the old TV shows I like without hunting for a DVD.

Scott.