Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Burn pressure treated lumber?

Posts

Burn pressure treated lumber?

#1

Burn pressure treated lumber?

Brian in Sandusky, OH

>I just finished up a staircase on the exterior of my shop, and I have plenty of scrap pressure treated lumber.

Is there any danger to my health involved with burning it in my stove? What about the health of my stove or chimney?

Thanks.

Re: Burn pressure treated lumber?

#2

JL

ACQ Lumber?

JL

>Shouldn't be that big of a health threat - ACQ is Alkaline Copper Quaternary. Not like the old days with the CCA (Copper Chromium Arsenate). I wouldn't inhale much of the ACQ smoke - there might be some bad health effects - but you won't be getting heavy metal poisoning.

Re: Burn pressure treated lumber?

#3

Re: Burn pressure treated lumber?

Bill Howatt

>I never do and this is what an ACQ treated wood manufacturer has to say about handling it:

An important precaution is DO NOT BURN TREATED WOOD. Burning treated wood releases the chemical bond with wood cells, so dispose of scraps and sawdust with your landfill trash. Wear gloves when handling treated lumber. And always wear safety glasses and a dust mask when sawing or cutting treated lumber just as you would with untreated lumber

Re: Burn pressure treated lumber?

#4

Re: Burn pressure treated lumber?

GalenV

>I only burned a few dimension lumber scrap starter sticks in my Vermont Reliant wood stove as any large amount at any time and the stove got too hot. Only burned green treated in hot outdoor burn pile as normally it was too wet to put in the stove.

Re: Burn pressure treated lumber?

#5

Re: Burn pressure treated lumber?

Barry Irby

>ACQ is five times as corrosive to steel as the old stuff. Have no idea what it will do to the environment once burned and I wonder if it will be as hard on your stove and flue as it is on deck fasteners. Don't think I would do it.

(Not a chemist, don't actually know)

Re: Burn pressure treated lumber?

#6

Re: Burn pressure treated lumber?

steve mackay

>Done a lot of asking around about what to burn. My big one is plywood. LOTS of it out at Ft Bliss packing & crateing. Found out that now-a-days pretty much all plywood is OK (although it does leave "puck" of residue in the bottom that I just snatch out every couple weeks). The only looks of horror I got was for "treated" woods of ANY flavor. While the heavy metal treated is outlawed theres not hard answers about the modern treatments as far as burning. I've, since, even taken my SOP to wood that has spill stains on it. With plenty of scrap around to burn why worry my pretty little head about it. Besides . . . five or ten years down the line SOMEONE is going to find that some thing you were burning is bad for you.

Re: Burn pressure treated lumber?

#7

Re: Burn pressure treated lumber?

Dave Tenney

>Be careful around the smoke...a few years ago we were building a deck for someone in the fall, and had a scrap pile of cut offs burning. It was kind of a brisk day and each of us would take breaks and warm up by the fire.

Long story short, we all got sick as dogs from the smoke.

Dave