Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Veneering with Titebond PVA for DARK Wood

Posts

Veneering with Titebond PVA for DARK Wood

#1

Alan Young

Veneering with Titebond PVA for DARK Wood

Alan Young

>I have been using Titebond Liquid Hide Glue for vacuum veneering until a recent project when I decided to try Titebond "Dark Wood Glue". I had heard of others using PVA with no problems and the Sales pitch at Titebond says it is unaffected by finishes. I think they should have said whether or not the finish is affected-I veneered several door panels of Sapele with the PVA Dark Wood Glue and the bleed through is blotching the finish in some areas. My bleed through experience with the hide glue was never a problem. Do I have any choices but to re-veneer? If not should I remove the first layer or can I apply a second layer of veneer using Hide glue over the first layer of PVA?

Alan

Re: Veneering with Titebond PVA for DARK Wood

#2

Ellis Walentine

Try this first

Ellis Walentine

>Alan, try scraping the veneer to bare wood and then refinishing. In my experience, blotching like you describe is a function of squeezed-through glue remaining on the surface of the veneer.

If that fails, the answer may be a bit more complicated, depending on the nature of the veneer. For example, you may want to hit the back side of the veneer with dilute shellac to seal the pores and then sand it before applying the glue.

I'd start with the path of least resistance.

Ellis

Re: Veneering with Titebond PVA for DARK Wood

#3

Alan Young

Re: Try this first

Alan Young

>Thanks Ellis,

This veneer is on the thin side so I sanded less than I probably could/should have. I have 8 panels-Only 2 of which have significant problems. I'll approach cautiously as suggested...

HAPPY BIRTHDAY WC!


Re: Veneering with Titebond PVA for DARK Wood

#4

Ellis Walentine

Looks like Mutt 'n' Jeff to me :-)

Ellis Walentine

>Montanafest was really a wonderful getaway, wasn't it? I'd do it again, but now Lee lives in St. Croix. That wouldn't be too hard to take. :-)

Thanks for the memory.

Ellis

Re: Veneering with Titebond PVA for DARK Wood

#5

Certainly Looks Like Two Young Men!

George@Colonel's Workshop-Havertown PA

>

Re: Veneering with Titebond PVA for DARK Wood

#6

Looks like Cookie Duster Twins, eh?

Kneale Brownson dreaming of snow in N. MI

>

Re: Veneering with Titebond PVA for DARK Wood

#8

Re: Veneering with Titebond PVA for DARK Wood

pecker

>Titebond makes a glue specifically for veneering, called Cold Press Veneer Glue. It bleeds through less.

Re: Veneering with Titebond PVA for DARK Wood

#9

Alan Young

Oh Happy Day...

Alan Young

>Ellis,

I scraped the surface back in the blighted areas and it seemed to work. I re applied the clear finish which was rendered clean& uniform.

I admit this doesn't seem to add up though. If the order of elements is Substrate-Glue-Veneer, and the glue bleeds through the top surface of the veneer, why does scraping/sanding seem to leave a clean veneer? I would think that the glue had filled all the pores and as such once it reaches the top surface, scraping will only reduce the thickness of the glue/veneer....What ever that thickness is it would seem the glue would still prevent the finish from filling the pores as the glue has taken up that space....What am I missing here?

Happy but confused...

Alan

Re: Veneering with Titebond PVA for DARK Wood

#10

Re: Oh Happy Day...

Thomas S Stockton

>Hi Alan,

Yes the glue will fill the pores but they are so small you won't notice it. The problem you had was glue on the surface which being a much larger area is pretty noticable. All the glues I have ever used for veneering will bleed through to some extent you just need to make sure you get it all off.

Tom

Re: Veneering with Titebond PVA for DARK Wood

#11

Ellis Walentine

Re: Oh Happy Day...

Ellis Walentine

>When you press veneer, the glue is driven through the pores to the surface by hydraulic pressure. Once the glue gets through the veneer, it has to go somewhere, so it squeezes out onto the surface of the veneer. Those concentrations of squeezeout are the blotches you saw. Scraping off this thin film of flattened glue reveals the surface of the veneer again. The only glue remaining at the surface is that in the filled pores, even with the surface of the veneer.

Ellis

Re: Veneering with Titebond PVA for DARK Wood

#12

Alan Young

ThanksT&E Grasshopper now closer to grabbing rock

Alan Young

>