Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Platinum Series 16" Jointer / Planer Combination

Posts

Platinum Series 16" Jointer / Planer Combination

#1

Platinum Series 16" Jointer / Planer Combination

Mark Stone

>Hey All,

Long time since I've dropped in. I hope everyone is dusty...

I wanted to share my latest purchase with all of you and get your opinions on quality and craftsmanship.

I ran into a major space issue in my single car garage. I decided to get rid of my 16/32 performax, reliant 6" jointer and 12.5 in delta planer. I will offer the three tools in woodcentral classified tomorrow or by the weekend. I need to take some good pictures first. I replaced them with a laguna 16" jointer/planer combo. I will end up gaining back several square feet of space in my small area. Laguna has free shipping for all of October... so, I took the leap. I'm expecting it next week. I prompted to go with the Shear Tec Spiral cutterhead. It has a 4HP foreign motor (no baldor here). The jointer bed is 63 inches. Has anyone had any experience with Laguna's combo's? If so, I would love to hear your opinions.

Hoping to hear from some of you folks soon!

Cheers,

Mark


img

Re: Platinum Series 16" Jointer / Planer Combination

#2

Re: Platinum Series 16" Jointer / Planer Combinati

Bill Earl

>I have only seen the Laguna in pictures, but it appears to be based on the same iron as the Rojek MSP-415. The motor and cutterhead are different, but the base, fence tables & adjustment controls appear identical (aside from the paint).

The Rojek is a solid & precise machine. My only complaint is the 4" dust port. When thickness planing wide boards, chip extraction is only fair.

Re: Platinum Series 16" Jointer / Planer Combination

#3

Re: Platinum Series 16" Jointer / Planer Combinati

Mike Fitterling

>I saw that machine at IWF and looked it over pretty well. Very nice machine. I had the floor person switch it from planer to jointer and it was the quickest and easiest changeover I have seen. I think you are going to like that tool. And, by the way, regarding dust collection, because you went with a spiral head I think you will find the port OK; spiral heads really help with chip extraction. I have a 4" port on my now spiral cutter planer and chip clearance was very much improveed when I switched from the straight knives to the spiral (Byrd). Of course, that depends on you having an adequate DC.

Cheers,

Mike

Re: Platinum Series 16" Jointer / Planer Combination

#4

Bart Goldberg

Stealth Gloat Fer Sure :)

Bart Goldberg

>

Re: Platinum Series 16" Jointer / Planer Combination

#5

Re: Platinum Series 16" Jointer / Planer Combinati

Warren E. White

>My advice is that the machine is not worth the space in your garage. Keep the other tools and I will send you my address. I will gladly take delivery (thanks in advance for the gift).

Seriously, that looks great, and I am green with envy. What an aircraft carrier! Let us know your impressions once you fire that baby up!

Re: Platinum Series 16" Jointer / Planer Combination

#6

Nah!

Mike Fitterling

>I already own an aircraft carrier that I would not trade for the world--a Northfield 12". Now THAT's a gloat; I won't even tell you how much I paid for it! Might cause heart palpitations. ;)

Re: Platinum Series 16" Jointer / Planer Combination

#7

Re: Platinum Series 16" Jointer / Planer Combinati

Mark Stone

>Thanks to all for the comments,

Bart is right, I have to admit. For me, this was a gloat... :-)

I tried Bart Goldberg's 8" DJ-20 w/ a spiral cutter head and was floored by the performance.I already have a delta 12.5" bench-top planer and a reliant 6" jointer and did not want to get anything smaller. I will write in with an honest review when I get it and out it through it's paces.

I never thought in my wildest dreams, that I would own one these monsters. I have been saving for a while and I was really frustrated with my tiny cramped 1 car garage.

I am still recovering from loosing my wife 10 months ago... This will help with the healing (I hope).

My best to all

Hello Ellis!!!