What would you use to fill holes in Oak Flooring?
Barry Irby
>I have posted several times about patching and sanding oak flooring in an old house I am working on for my cousin.
My original thought was to use some of the sawdust I have saved from the sanding and pack it into the nail holes and other defects and then soak it in thin CA glue and sand it off.
Now I realize there are hundreds of holes. Staples from pulling up carpet and pad. Holes where the tack strip was. And, for some reason someone nailed 4d finishing nails around the perimeter about four inches apart. And there are some dings and some cracks between boards.
So, something I could trowel in or put in with a putty knife would be good. Any suggestions? (Not sure if the floor witll be stained or left natural.)



