Tiger Maple
Paul T
>Good Evening all,
What would you pay for tiger maple, kiln dried, 1x6x8. Planed all four sides. I don't have a use currently, but ran across a handful of boards at a local borg and am thinking of grabbing them.
TIA,
Paul
Knowledge You Can Build On — Est. 1998
Tiger Maple
Paul T
>Good Evening all,
What would you pay for tiger maple, kiln dried, 1x6x8. Planed all four sides. I don't have a use currently, but ran across a handful of boards at a local borg and am thinking of grabbing them.
TIA,
Paul
Re: Tiger Maple
Erick Singleman
>I pay $4.00 a board foot for tiger maple in upstate NY. Planed and one edge jointed. i have seen it as high as $8.00/bd-ft at the high price lumber yard that carries all the specialty woods.
These prices were for 4/4.
Re: Tiger Maple
Erick Singleman
>Oh, that was soft maple tiger. I think Hard maple tiger was maybe $4.50 or $5.00
Re: Tiger Maple
WillieO
>Do you mean 1" by 6" by 8'
Not all tiger maple is created equal some are heavily figured and some not so much. I have some really nice 5/4" by 8" y 10' boards in the shop that cost me 8$ a board foot. Its luthier grade and honestly has been waiting years on a top shelf for me to get to. I certainly would like to make a violin before I leave this place
Re: I've been called
Glenn Madsen near San Francisco
>an elitist, by someone who knows me well. My wife.
I don't know that I would go looking for tiger maple at the Borg. Just me. I haven't really found wood worth using there in some time, even on short notice.
The local wood supplier has thicker 4/4, S2S, hard and soft (three kinds), and 5/4,6/4,8/4 and 12/4, in lengths to exceed 12 ft. Wide widths. And reasonably priced, too.
The big thing with me and maple, is color match. I need enough for my project, plus 30%, to feel comfortable to get me through. Can't easily do that at the Borg.
I buy my tiling supplies there. I'm not nearly as picky about them. ;-)
Re: Tiger Maple
Don Orr
>Sometimes you can find interesting stuff at the Borgs if you pick through the piles. I've seen curly Poplar, birdseye Maple, curly Maple, you never know. Borg prices tend to be on the high side relative to regular lumber yards. But regular lumber yards will charge more for figured wood. I think if you feel it is a decent price for curly(tiger),grab it and then find a project in which to use it. One drawback to s4s wood is if it warped or cupped or twisted, you will lose a bit of thickness when straightening. Your 3/4" boards can become significantly thinner.
Good luck.
Where I shop!
Lee Schierer - McKean, PA
>I don't pay any more for tiger maple and they encourage me to take it. My lumber source supplies hardwood dimensioned lumber to the building trade. Builders don't like curly wood so they leave it behind. I pay $2.72 a lineal foot for maple F4S in lengths under 10 feet. They usually round down on the length.
Lee
Re: I've been called
Paul T
>I agree, I don't shop for lumber at the borgs either, I was just "roaming" around after I got what I needed and seeing what I didn't know I needed.
These guys are all lying to you
GolfSteve in Calgary
>I've never seen Tiger maple for sale in this part of the world for less than $15/bf. The local retailer tries to get at least $25 to $30 a BF for anything with decent figure. If I shop around I can find stuff cheaper - but only down to the $15 range.