Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Stupid question - polishing my TS top

Posts

Stupid question - polishing my TS top

#1

Stupid question - polishing my TS top

Terry Alexander

>I'm certainly not a chemist.

But I do not understand why when I polish my TS (using Johnson's Paste Wax) that it turns my cloth black ;-(

The TS is clean clean clean. I use a soft wire brush on my drill to make sure I get any wood residue off. Then I wipe it down with a dry cloth. Then...when applying the wax, it turns my t-shirt applicator black.

Probably not a big deal...but just one of those...Hmmmmm....I wonder why this happens.

I am "assuming" there is some chemical aspect to this which is why I prefaced the Q with "I'm not a chemist.

Thanks....more curious than anything as it is clean, smooth, and wood glides over the table.

TIA

Terry Alexander

Re: Stupid question - polishing my TS top

#2

Re: Stupid question - polishing my TS top

Jim Dillon

>Terry,

Just guessing here, but you are probably seeing nothing more than the organic solvent (toluene?) in the wax dissolving and pulling off normal dirt and grime that accumulates on the TS surface. I wouldn't worry too much about it, except maybe to change your wax application cloth every 10 years or so 8-).

Jim

Re: Stupid question - polishing my TS top

#3

It's quite simply, really

Mark Goodall - ATL - tooljunkie

>The cloth absorbs the darkness from the saw's tabletop as it becomes lighter.

You see, the darkness creeps into the saw during the night when all the lights are turned off. During the day there really isn't enough light to remove all that darkness from the night before. So the darkness collects and we must periodically wipe that darkness off using a cloth. The cloth absorbs the darkness from the saw's tabletop as it becomes lighter.

The alternative is to leave the lights on all the time, or at least use a small night light on in the corner of the workshop. Either that, or take the saw outside into the sunshine on a daily basis, which is really only an option in places like San Diego, Miami and Las Vegas, and not in Seattle, Portland, Bangor or Juneau.

And since we're on the topic.... make sure you dispose of the cloth properly. A cloth or T-shirt that has absorbed darkness can be dangerous. Properly disposing them is important, yet is as simple as digging a 6 foot hole in the ground (4 feet if within the perimeter of a cemetery) and burying them with 7 cloves of garlic.

Happy Woodworking!

Re: Stupid question - polishing my TS top

#4

Re: Stupid question - polishing my TS top

Chuck in ND

>Terry, I would say it's probably some grime and a little bit of really fine metal from useing the wire brush on it. I get the same results. Mark, your not from Fargo are ya eh ?

Re: Stupid question - polishing my TS top

#5

I think the answer is Cast Iron

gil jones in Georgia

>

Re: Stupid question - polishing my TS top

#6

Jesper, Denmark

Re: It's quite simply, really

Jesper, Denmark

>I like Mark's answer better, but it is the graphite in the cast iron that is released when you abuse the surface with the wire brush.

Re: Stupid question - polishing my TS top

#7

DIng, Ding, Ding!

RobV

>We have a winner.

The black stuff is metal. Since cast iron is rather soft there's just enough abrasive in the rag to take off a small amount of the metal and the wax makes it cling to the rag.

Same thing happens when you polish silver or brass.

Re: Stupid question - polishing my TS top

#8

JL

LOL - Beware of darkness...

JL

>

Re: Stupid question - polishing my TS top

#9

Wow Mark

Dustmaker Mike

>so you are saying it is like a light bulb. When they suck up enough darkness they stop working. Does this apply to the TS also? Simply Amazing(-;

Re: Stupid question - polishing my TS top

#10

use a black tee shirt

Wayne Carson

>

Re: Stupid question - polishing my TS top

#11

He's Making Light of Keeping Us in the Dark

George@Colonel's Workshop-Havertown PA

>

Re: Stupid question - polishing my TS top

#12

Re: It's quite simply, really

Bill White

>Mark,

You've been to Buckhead one time too many.

I couldn't find the T shirt after I washed it.

Bill

Re: Stupid question - polishing my TS top

#13

It's un-illuminating .

Lee Schierer - McKean, PA

>

Re: Stupid question - polishing my TS top

#14

Re: Stupid question - polishing my TS top

Terry Evans

>My response is probably to late but, what you're removing are very fine metal particles from the table saw top. Nothing wrong with that. However you go through an awful lot of work for a temporary coating to portect the surface.

I love my tools. I consider them my toys. So I keep them in the very best shape possible. That being said, when it comes time to protect my table saw top, I simply wipe it off with a clean rag and apply car wax. It looks like it did when I bought it almost twenty years ago and I find that the car wax makes the surface slippery for a time. When I can't slide the wood easliy along the fence I know its time for another was job.

Re: Stupid question - polishing my TS top

#15

Re: Stupid question - polishing my TS top

Rob Stokes in North Vancouver

>Terry - I do the same thing, except I use a furniture paste wax (Johnson's). Car wax has silicone in it. Silicone can (and does) cause interference with finishes. Even though the chances of transfer from your saw to the wood are small, and that any amount transferred would be small, and assuming you'll further refine the wood before you apply a finish, transfer is indeed possible. So why take the chance when other products will give you the low coefficient of friction on the saw and not cause potential problems later in the process?

Rob

Re: Stupid question - polishing my TS top

#16

Re: Stupid question - polishing my TS top

Carol - now back in Dubuque, IA

>There is that, Rob.

Here is another thought.

When I was teaching woodworking many years ago, we had a contest to see what was more slippery - car wax or floor wax. Turtle Wax or Johnson's Paste Wax, specifically.

We waxed one side of a table saw with one wax and the other side with the other wax. Then we dusted the tops with really fine saw dust from a bag on the big disk sander. Everyone agreed the playing fields were as equal as we could get them.

Then we cut two pieces of wood, I think around 1x1x2". We station a person to blow behind each piece wood now perched at the edge of the saw table. We used the table saw fence to "divide" the wind effects. On the count of three, they blew at the wood. The floor wax side won every time.

They swapped sides, and blowers, and pieces of wood. That was a class period that got sort of out of hand. :-) But it was fun.

Re: Stupid question - polishing my TS top

#17

Re: Stupid question - polishing my TS top

Clint Searl, at the base of Haycock Mtn

>Steel City just announced an option for a teflon coated granite top.

No rust - No wax - No sticking

Don't worry, be happy.

Clint

Re: Stupid question - polishing my TS top

#18

Perhaps

Bill Houghton, sunny in Sebastopol, CA

>I've been told, and it makes sense, that car wax has fine abrasives in it to cut through oxidation on the paint. If that's the case, then it may leave some abrasive residue mixed in with the coat of wax on the surface.

A can of furniture wax is so cheap at the hardware store or box store; mine's lasted a good five years and is just beginning.