Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

gun sighting in station plans needed

Posts

gun sighting in station plans needed

#1

gun sighting in station plans needed

Terry Alexander

>Looking for help again.

I am so internet challenged.

I am trying to find some woodworking plans for a sighting in station for a rifle. Yep...I can buy a plastic one at Bass Pro Shop for under $20. And, I can spend about $200-$300 for a rig that serious shooters use....almost daily.

What I want to do is hone up on my woodworking skills and (obviously) make something that I can show off to my shooting pals.

Any assistance would be greatly appreciated.

As always...TIA

Terry Alexander

Re: gun sighting in station plans needed

#2

Re: gun sighting in station plans needed

Gene Gauss

>Awhile ago, I googled on "benchrest bench plans" and came up with a couple of ideas, one of which had a pretty detailed drawing.

Re: gun sighting in station plans needed

#3

Re: gun sighting in station plans needed

Randy Johnson Connersville IN

>I don't have a link to any site but the concept is pretty simple.

Three legs, two at the front and one at the rear for stability. It might be a good idea to make the rear leg adjustable in case the suface you set up on isn't level. Length is a personal preference but I would make it somewhere between 36 and 48 inches. Make the front about 30 inches wide. The sides need to be dished out to allow a comfortable position with the gun near the center of the front. Dish both sides so both right and left hand shooters can use it. You can either buy a rest or incorperate one into the bench using course thread all-thread or shims for height adjustment.

If you will be using a revolver or a tradional muzzleloader it's a good idea to use leather instead of some kind of cloth to cover any padding.