Arranging pieces of differing color...
Scott in Douglassville, PA
>Hi, all -
I'm getting ready to start assembly on the Shaker stool I'm making for the MiL. Due to, um, difficulties (ahem), there's cherry from three different sources in this project. Two of them - some old Texas-bought cherry and some curly cherry, are nice and pink in their raw, milled states. The third stock, though, while beautiful in its own right, is much paler, and much creamier colored.
I'm averse to staining cherry this nice, and it'll darken over time to pretty close shades (the wood's leftover from projects years gone by - I have examples of what the oiled stock'll look like in a decade). For now, though, I'm wondering how best to arrange the wood so as to bring some sort of unity to the piece. The legs are all evenly-colored. Of the 12 rungs, four are curly and pink, four are creamier/paler, and four (the ugliest, obviously) will be covered by Shaker tape.
So, what to do? Put the pale rungs together on two sides? Or mix them in with the pink wood?
Sorry for the verbosity... ;^)
Thanks for any suggestions.
Scott



