Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Bandsaw tune

Posts

Bandsaw tune

#1

Bandsaw tune

BrianA

>Bought a grey Ridgid BS14. Very little use and in good shape. I am having trouble getting the bearings to line up behind the blade. The wheel pushes so far forward that is pushes a lot on the blade. I can adjust it toward the blade (toward the teeth & back) but not move the whole bearing away from the blade. I tried twisting the post that raises up the guide assembly, but that did not work. Any ideas?

Brian

Re: Bandsaw tune

#2

Re: Bandsaw tune

Curly Smith

>See pages 23-24 of the Ridgid 14" Bandsaw Manual

Note: it's a pdf so it will take time to download

Re: Bandsaw tune

#3

Re: Bandsaw tune

John K Jordan

>Is the blade riding too far back on the tires? If so and it can't be adjusted to center, you may have to align the upper and lower wheels. The "Bandsaw Book" and "Bandsaw Handbook" are the two references I used when tuning my Delta.

A call to Iturra Design (888-722-7078) may provide excellent consulting and any parts needed.

JKJ