Table Saw Shopping?
Greg Haugen
>I was just curious about what table saw you'd say is the best "saw for your buck?" It doesn't have to be a super powered saw, mostly looking at making some boxes.
Thanks,
Greg H.
Knowledge You Can Build On — Est. 1998
Table Saw Shopping?
Greg Haugen
>I was just curious about what table saw you'd say is the best "saw for your buck?" It doesn't have to be a super powered saw, mostly looking at making some boxes.
Thanks,
Greg H.
Large kettle of worms...
JL
>But I'll bite anyway.
I'll rule out any "portable table saws" immediately. Though there are some reasonable job site portable saws, I don't think that they have the needed accuracy boxes.
That leaves you with contractor's table saws, hybrid table saws and cabinet saws.
If you are speaking of safety - the Saw Stop is the best - contractor's or cabinet saws.
I think that for your purpose, any good hybrid would work quite well or any good contractor's saw. Of course if you want to spend the money on a cabinet saw :).
I've got a Steel City Cabinet saw - I like it a lot. I looked long and hard at their hybrids - and they are worth considering. Grizzly's lower end cabinet saws can be had for a similar price to a hybrid - so they might be worth considering - but only if you have 220V readily available.
My personal preference in terms of price/quality would probably be Steel City. Go by a showroom and look at a few saws. If you are near Atlanta, Redmond Machinery has rows of table saws available to look at (Steel City, Powermatic, General, Jet and Delta).
Re: Table Saw Shopping?
Neal in San Jose
>There have been two reports of people getting hurt on their table saws in the last week or so. Every time I hear of something like that, I know I did the right thing when I sold my Jet Cabinet saw (a very capable and well made saw BTW) and bought a Saw Stop. The cabinet version was the only one available at that time, and I think I would still go that way, but the contractor's style looks as well built and includes all the same safety gear for a more budget friendly price.
Neal; just trying to go out with the same number of digits that I came in with.
Re: Table Saw Shopping?
Glenn Madsen near San Francisco
>It matters where you'll use this, because the cabinet saw will take up some room, and not scoot easily to one side of the garage so your wife can park there. In some places, that doesn't matter.
Right now, used cabinet saws, Unisaws, mostly, are going pretty cheaply. While it can be done, it's hard to wear one of these out. $1000 will almost certainly find you one with 35 years more use in it, parts availability, and all of the accessories available you could imagine.
If you're working on the back porch, or from a condo balcony, it's not such a good choice, however.
Re: Table Saw Shopping?
Curly Smith
>If I didn't already have a TS and all of my other stuff, I'd give Festool a serious look (Festool demos can be found here: http://www.woodshopdemos.com/men-fes.htm) but if I were determined to buy a TS then I'd seriously consider the Saw Stop. It's tough to evaluate the "best bang for the buck" because one accident can drastically change the total cost of ownership.
Disclaimer: I don't have any Festool stuff and don't plan to buy any since it would not be cost effective to replace, or duplicate, every other tool that I presently own. If I were starting to acquire tools then it might be different.
Re: Table Saw Shopping?
Fred Davis
>Used to be a good pro lightweight from Oregon named Greg Haugen.
FredD
Re: Table Saw Shopping?
Thomas Skaggs, Foothills of Mount Level
>Probably one of the better ways to get the most saw for the buck is to buy a good condition used one. Check Craig's list, the newspapaer ads etc. At used prices you might end up with a quality tool for the new price of a lesser saw.
Tom
Re: Table Saw Shopping?
Clementine
>Every time I use my General 185L, I think, "Man, that is a beautiful saw." Just my opinion.
Re: Table Saw Shopping?
Chuck in ND
>Man, some of you guys are going to scare alot of potential woodworkers away when you start telling them they need to buy a $2,000 - $5,000 saw, not all of us are rich. Looking for a used saw is not a bad idea if he knows what he's looking for. The guy really doesn't give enough information about what his situation is to determine what will work for him. What his budget, working space, and future woodworking plans are would be good to know.