Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Extracting black walnut hulls for wood dye?

Posts

Extracting black walnut hulls for wood dye?

#1

JL

Extracting black walnut hulls for wood dye?

JL

>Seeing how I'm already taking black walnuts from our friends to harvest the nuts - I'm separating the hulls. I've gotten a procedure from the one of the local spinners who uses the hulls to dye her wool.

Has anyone ever tried extracting black walnut hulls and used it to stain wood? This is the basic procedure that I'm following.

# Gather black walnuts from the ground.

# Place hulls in non stainable container (glass or stainless steel)

# Fill with the container with hot water.

# Cover the container.

# Allow to steep several days until the dye achieves the depth of color you prefer.

# Strain any solids out of the dye.

# Dye can be decanted into containers and frozen to keep for later use.

# Add a small amount of white vinegar to the dye to reduce the possibility of mold.

# Dye can be painted or sprayed onto finished material.

Anyone have any other suggestions?

TIA

Re: Extracting black walnut hulls for wood dye?

#3

Re: Extracting black walnut hulls for wood dye?

Gil Jones

>I use Walnut husks (old, dry, and crushed), a quart of straight household ammonia (no soap or perfumes in it). Mix it all together in a 1-gallon (or 5-quart), lidded plastic ice cream container (after eating the ice cream). Top off with tap water, secure lid, and let it soak (leach) for a month or two. Strain through a paper towel lined paint strainer a few times, and you have the most beautiful medium chocolate brown color stain. It does smell bad. I have not used alcohol, but have not had any mold troubles.

Gil

Re: Extracting black walnut hulls for wood dye?

#4

Re: Extracting black walnut hulls for wood dye?

John Veerkamp, Western Mo

>JL,

I have done natural dyeing for many years for the fiber guild loml and I belong to. The procedures descrbed above will work well for extracting the pigments. I Generally take the hulls after they have turned black and cover them with ammonia and water and leave sit for months over the winter in a sealed container. It does need to be strained well as there are lots of fine solids in the solution. I have used it successfully on cotton, wool, silk as well as reed and rattan basket fibers. I haven't used walnut on wood, but have used other natural dyes on wood with some success. You might try adding some alum with the solution as a mordant.

Have fun with the experiments.

John

Re: Extracting black walnut hulls for wood dye?

#5

Re: Extracting black walnut hulls for wood dye?

Malcolm Timbers

>Not a good idea as walnut is prone to bleaching out in sunlight unless you put several coats of shellac on it to block UV rays.