Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Cut myself on the jointer

Posts

Cut myself on the jointer

#1

Cut myself on the jointer

Dan Mitchell

>When I was in jr. high shop class, low these many eons ago, the shop teacher warned "if you're going to get cut on something, make sure it's not the jointer. On any of the saws, there's always a chance they can sew the severed bit back on, but the jointer chews it up & spits it out".

Too bad he didn't warn me about the fence.

Yup, the jointer FENCE.

I was edging a bit of poplar, about 3.5" high, when the ring finger of my right hand rubbed against & got a nasty slice on the edge where the top of the fence meets the face.

Bled all over my poplar...

What?!? I HATE wearing BANDAIDS!!!!!!!!!!!

True story.

Dan

Re: Cut myself on the jointer

#2

Re: Cut myself on the jointer

Ken Oakley-Sunny St. Cloud, Fla

>Have you considered taking up knitting instead of woodworking? Oops, I forgot the needles are pointy things.

Re: Cut myself on the jointer

#3

Ellis Walentine

Another good lesson

Ellis Walentine

>I hope you got out a big mill file and eased the rough edges of your jointer's castings. Chinese-made machinery isn't known for its smooth castings and edges.

Ellis

Re: Cut myself on the jointer

#4

Re: Cut myself on the jointer

Lee Schierer - McKean, PA

>Was it the fence or the jointed edge of the board. I've sliced myself on board edges while jointing the other side. Wood corners will cut just like paper. or sharp steel.

Lee

Re: Cut myself on the jointer

#5

Re: Cut myself on the jointer

Mike Hamilton

>Better to have an incident with the fence than the cutter head.

I worked in a furniture factory in North Carolina in my younger days (eons ago). One fellow lost a chunk of the heel of his right palm (hanging over the end of the board when the board splintered, momentum carried him right into the blades). Grafted some skin from his buttocks onto the cut area. Hair follicles continued to work and he took a lot of grief about "hairy palms." He was happy to have a perfectly usable hand.

Regards,

Mike

Re: Cut myself on the jointer

#6

Re: Cut myself on the jointer

Dan Mitchell

>I filed the edge off the fence, now all is well. Agreed, better the fence than the blades ;-)

Dan

Re: Cut myself on the jointer

#7

Re: Cut myself on the jointer

Marv....... Northern California Lake Co.

>When I was much younger I worked part time at a hardware store that also had an adjoining cabinet shop. Customers would often times want some custom work done to a board, etc. One day a guy with his 6 year old boy came in, bought a 1 x 6 and wanted me to run it through our 12 jointer. When this thing was turned off it would continue to run for 15 minutes. So I jointed the guys board and when we turned our backs to the machine, his kid went over and thought the jointer head was smooth and reached over and touched it. Snick! The kid was bent over, holding his hand and bleeding and trying not to cry while his dad was yelling at him...."come on, it didn't hurt!" I wanted to take the guy over to the machine and stuff his hand into it just to let him know how much it didn't hurt.