Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

I decided to do some fall cleaning...

Posts

I decided to do some fall cleaning...

#1

JL

I decided to do some fall cleaning...

JL

>and try and post multiple pics too.

Sharpening stationn w/ 8" slow speed grinder and Tormek - tub of waterstones is in the cabinet.


Lathe, bandsaw and Cyclone.


Wood storage - I do a lot of spindle turning. This is where I keep most of my blanks.


Jointer, Router Table, Drill Press and lumber rack.


Back wall, right side.


Center and left side of back wall.


Cabinet saw (Steel City 5 hp).


Rikon (18").


Re: I decided to do some fall cleaning...

#2

Re: I decided to do some fall cleaning...

Don Orr

>Really nice shop JL, good job on the clean up. I like your lathe-I have the same one ;-)) Now you get to mess it all up again !

Re: I decided to do some fall cleaning...

#3

JL

I found my workbench while I was at it.

JL

>I had been wondering where it had been.


img

Re: I decided to do some fall cleaning...

#4

Re: I found my workbench while I was at it.

George@Colonel's Workshop-Havertown PA

>Good Morning JL,

that is a lovely chair sitting atop your bench. I presume you set it on the floor before using it! I'd like to make one or two myself some day. I noticed the radial drill press, and wish I hadn't passed one up when making my own selection 12 years or so ago. My #3 son has one, so maybe he'll loan it out. What choice of woods for seat, spindles and crest? BTW, nice clean shop.

George

Re: I decided to do some fall cleaning...

#5

JL

Wood, glue list for the Colonel

JL

>Seat - eastern white pine - single plank, not glued up.

Legs, stretchers, stiles - hard maple.

Crest, spindles - white oak.

Leg wedges for the top tenons - black walnut.

Crest pins (in the front, to secure crest to stiles) - white oak.

Original Titebond for legs, stretchers, stiles, especially to the seat.

Hide glue for spindle bottoms and spindle & stile tops. It was rabbit hide glue.