Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E. Peacock

>29 Sep 2008

Boy has this year flown by!!!

Been working with a lot of wood, but not any "woodworking" though. Been cutting up already downed trees, cutting down a few dead trees and stacking wood for heating this winter. Next year, I've gotta get an earlier start.!!

Had to replace the wheel bearings on my trailer because I had one side that was noisy no matter how much grease I packed in the bearings. Now, my tires are cracking from being 8 years old on the trailer and thankfully a buddy at work gave me 4 tires off his Jeep that should fit my trailer (I only need two tires as the trailer is only a single axle).

I have a little more wood to go and cut but that may have to wait until next week as I'm oncall for work this week and that's going to take a lot of my time.

Went and saw the newly released movie "Fireproof" with the family last night. WOW!!! What an awesome movie! At least that what we thought about it, but YMMV.

Well, that's it for me, so what did YOU do this weekend??

Best of weeks to you all.

Dennis

Re: WC Weekend Accomplishments....

#2

WC Weekend Accomplishment.....

Ray Carson - Lawrenceville, NJ

>It's DONE !

I finally finished re-decking my deck. Dad came up from Whiting and helped me put the hand railings back on yesterday. I also fixed some screw ups and some things I didn't like. We had to work in the rain a little as the weather here in Mercer County was a little moist this weekend. It felt sooooooo good to finally put that project to rest. I will have to do a light sanding on the the side in which I flipped the boards and then I'll have to stain or seal the entire deck.....but.....that's a days' work at best.

All decked out in NJ,

Ray

Re: WC Weekend Accomplishments....

#3

Re: WC Weekend Accomplishments....

Mac in Indy

>Dennis it sounds like you are getting a workout working wood but not getting much woodworking done! It'll pay off in the end. I'm in the same boat in a way. I've been trying to get the inside of the house finished up (a little fixing, a lot of painting) as I have sort of ignored a lot of it for the last couple of years. I had a week off a few weeks ago and got a good head start on it but this weekend I continued the painting. It's slow going as I am painting a dark color up against off white trim requiring a lot of very carefull cutting out followed by some carefull wiping and touch up. It looks good in the end but it is SLOW!

Friday I spent time chasing down info about new pew-chairs for our upcomming auditorium remodeling at church. A lot of decisions to make since I'm the Building & Grounds guy.

My wife and I went with another couple to see Fireproof as well. A very good movie for married couples to see! I don't know about you but I need those kind of reminders once in a while.

I did get out in the shop Sunday between morning and evening services. I watched the NASCAR race and worked on the router table. This router table has been quite an adventure in trying new techniques. I had an interesting birch board that I found while edging the birch plywood for the carcass of the table. I decided to slice it up into thick veneer for the drawer fronts (plywood substrate). That dressed them up nicely but they looked incomplete so I milled up some 3/16 thick cock-beading and wrapped the veneered fronts. Dressed things up just right! This is way too fancy for the shop but it's been a lot of fun and I learned some things I will use in the future on real furniture.

Have a good week!

Mac

Re: WC Weekend Accomplishments....

#4

Ellis Walentine

R & R

Ellis Walentine

>...well, not really, but we took it a little easier than usual this weekend. The weather helped: we got about four inches of rain over the last three days, so lawn mowing and weed whacking wasn't an option. Instead, we spent time catching up on organization around here. Between my office and my wife's and our son's and the shop and the ceramic studio, there's plenty of chaos that needs ordering. With heating season right around the corner and heating oil at near historic highs, we're trying to figure out whether we want to augment our heat with a woodstove. It was fun fifteen years ago, but I'm less enthusiastic the older I get.

I also got to play with some samples of 50,000 year old Kauri wood from one of our Woodfinder suppliers, Ancientwood (fitting name). I'll show some pictures when I finish turning a piece of it.

I'm also testing some new finishes that I think are going to be very interesting to a lot of you. More on that later.

Have a good week!

Ellis Walentine, Host

Re: WC Weekend Accomplishments....

#5

Too Fancy????

George@Colonel's Workshop-Havertown PA

>Good Morning Ray,

Nothing could be too fancy for the shop! Too fancy for the house furnishings, perhaps. But never too fancy for the shop :<)

George

Re: WC Weekend Accomplishments....

#6

Computer Problem Diagnosed By #5 Son

George@Colonel's Workshop-Havertown PA

>Good Morning Dennis, and a happy Monday,

All that rain which Ellis mentioned drove me into a sheltered shop where the lathe loomed large. Charlie and I processed logs into 9 bowl blanks, and then he turned a dried twice turned blank for the second time. Following that I turned a couple disks into a candy dish. I also applied finish to the cherry bedroom lamps for the night stands. SWMBO shopped fpr shades unsuccessfully. We have two that will "do", so we'll have the lamps operational by COB today. Still trying to come up with a good queen sized bed design for the Master Bedroom Suite. Last night, we had seven of my kids, their spouses and children, and my sister present for the family dinner party: some 23 in all. We ate and drank copiously and had a delightful, fun filled time. My #5 son Steve diagnosed the computer problem as a defective memory chip, and Dell will furnish a replacement under warranty. Have a great week, Dennis.

George

Re: WC Weekend Accomplishments....

#7

I hate moving...

Gary Camp, Bend, Oregon

>But my moved house and shop really feel like home now. We moved most of our s???? ahhh Stuff this week end. The shop is full of household items, dang it. The closet I got to wood working was two stes of steps and a landing. I had to take the crane back to work before I got my decks put back on the house and I need to make the county building department happy. Oh well all in good time.

glc

Re: WC Weekend Accomplishments....

#8

Re: WC Weekend Accomplishments....

Jay St. Peter - Southern, MD

>My TV blew up last week - which eventually leads to woodworking content. Got a new 46" LCD TV this week and spent Saturday installing it. It wasn't even close to fitting in the entertainment center we had, so a temporary solution was brought up from the basement and modified. I spent a good portion of Saturday sketching some new rec room furniture to be built. A new top priority, which might even involve some speaker building. Should be fun.

Jay

Re: WC Weekend Accomplishments....

#9

Re: Too Fancy???? - Hello Colonel

Ray Carson - Lawrenceville, NJ

>Too fancy??? I'm not sure I get it, but it's good to hear from you. I was going more for the tuckered out kind of decked out with trying to spin a pun. I have no sense of humor....so the guys say here at work.

Ray

"I have a hell of a sense of humor don't I Corpral Briggs" (Stripes 1981)

Re: WC Weekend Accomplishments....

#10

Sorry Ray, I meant to address Mac in Indy

George@Colonel's Workshop-Havertown PA

>

Re: WC Weekend Accomplishments....

#11

Moved on to Painting . . .

Mike Fitterling

>. . . and cabinetry on the addition. Finsihed the vanity (birch ply case with cherry face frame) and Mpnday got the mirrors installed in the medicine cabinets (maple ply boxes with cherry doors and glass shelves inside) and got it plugged into the wall holes. Today, we start two cabinets to fill the opposite bathroom wall.

Re: WC Weekend Accomplishments....

#12

Re: Sorry Ray....I'll survive.....somehow :-)

Ray Carson - Lawrenceville, NJ

>