Clutch is slipping on my Dewalt 18V Drill/driver
JL
>anyone have any ideas how to fix it?
I'd rather not get a new one. But if I do, any recommendations?
TIA
Knowledge You Can Build On — Est. 1998
Clutch is slipping on my Dewalt 18V Drill/driver
JL
>anyone have any ideas how to fix it?
I'd rather not get a new one. But if I do, any recommendations?
TIA
Re: Clutch is slipping on my Dewalt 18V Drill/driv
Scott in Montana
>You might make sure that the speed range selection switch is fully engaged. I almost tossed out a drill/driver before I discovered a wood chip had lodged itself in there preventing full engagement. I know it's a long shot, but I'd hate to see anyone toss out a good drill.
Good luck!
Scott
Re: Clutch is slipping on my Dewalt 18V Drill/driv
Bob Entwisle in NJ
>JL,
Scott has a good thought, until I saw his post I had forgotten a couple years ago when I almost bought a new drill when my 14V DW got stuck midway in the speed selector or direction selector, made an awful racket and I thought I was going to have to get a new drill, New drill GOOD, not finishing small job at hand to go get one, PITA.... usuallly the weakest link in the battery drills is the battery, not the mechanicals.
Bob
Re: If you do need a new drill.........
Bob Entwisle in NJ
>If I had to get a new main goto battery drill, I'd get another DeWalt in a heartbeat. If I was augmenting my drills, I'd take a look at the Hitachi cordless drills. They're ugly, but a pro friend of mine likes them because they are cost effective for job site work etc.