Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Does BLO go bad over time?

Posts

Does BLO go bad over time?

#1

Does BLO go bad over time?

Ken Platt (Granby, CT)

>Folks -

After the discussion below on BLO (which was a good one, and thanks to Clint for starting it up), I intend to not use it again for finishing. However, I was planning to use the BLO/pumice technique to fill the grain on a white oak piece (a bed for my daughter).

The BLO I have is pretty old; the last note I have on it (I tend to date this sort of thing for exactly this reason) from when I bloxygen'd it last was March 2001. I don't have a purchase date on it (I've gotten more compulsive over the years). It's a gallon container, and about half-full now. It could be as much as 10-11 years old.

The stuff isn't too expensive, but it ain't free, and like most of us I hate to waste. So: is it too old to risk? Can you check BLO like you do for shellac, to see if it cures? If so, is there any specific technique, or just make a puddle somewhere and leave it alone for a week?

Thanks - Ken

Who thinks of himself as a recovering ex-BLO finisher.

Re: Does BLO go bad over time?

#2

Re: Does BLO go bad over time?

Dick Coers

>I'd say it definitely needs to be used on shovel and hoe handles now, and not furniture. I'm sure most of the driers and thinners are broken down or evaporated. It's probably way thicker than when it was new.

Re: Does BLO go bad over time?

#3

Clint Searl

No, it just starts that way

Clint Searl

>Couldn't resist.

Clint

Re: Does BLO go bad over time?

#5

Re: Does BLO go bad over time?

Robert R Clough - Thorncraft

>I don't know where I read this. I have been told that BLO should only be kept for about 6 months. After that it can get "heavy" and difficult to handle.

Re: Does BLO go bad over time?

#6

Dale Lenz

Re: Slightly different results

Dale Lenz

>Had a Qt. can of Crown brand of BLO from around 1983, sold paint then. Did not use much of it, so not much air in can, never have use the bi-stuff myself. Got back into using BLO after my shop was built, 1998 or so, worked fine. As Ellis said a few days ago, FFF, finish firewood first. Pour some BLO on a scrape piece of wood and wipe off after 15 min. or so and let dry overnight to 24 hours and see for yourself. Good luck