Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Help with hinge selection

Posts

Help with hinge selection

#1

Help with hinge selection

Mondo

>I'm looking for a hinge that I can use inside the enclosure, but that doesn't have a cup like the euro hinges. The door will be too thin for those types of hinges, but I can't mount the hinge outside of the box due to decorative molding. Is there something out there to do this? I've attached a drawing of the enclosure. The molding is 1/2" wider than the side of the box, so I'm not opposed to putting a 1/2" thick shim on the inside wall to mount a hinge. Thanks!


img

Re: Help with hinge selection

#2

Knife Hinges

Thomas Skaggs, Foothills of Mount Level

>You might look at using knife hinges at the tops and bottoms of each door. Tom

Re: Help with hinge selection

#3

Re: Knife Hinges

Mondo

>I made the mistake of not making that shelf shorter, so I don't think I could make knife hinges work. This is actually part of a 48" rack, just the bottom area will be enclosed with a door. It's already built and painted as well. If you couldn't tell, I have no idea what I'm doing. :)

Re: Help with hinge selection

#4

Re: Help with hinge selection

Hank Knight

>If your top an bottom rails are 1/2" thick or more, I don't see why knife hinges wouldn't work. From your drawing it appears that that the front of the shelf is flush with the back edge of the rail. If that's the case, all you need is a rail thick enough to accommodate the hinge. How thick is the door? If it's as thick or thicker than the rail you shouldn't have any problem. Keep in mind that there are offset knife hinges that provide a pivot point outside the plane of the front rails.

Another option would be to use glass doors with pin hinges (See Rockler or (I think) Lee Valley). They take up less room than traditional hinges or even knife hinges.

My $.02

Hank

Re: Help with hinge selection

#5

Re: Help with hinge selection

Hamish

>I'm not sure if it will work or not but if you don't mind putting a shim inside the cupboard, then why not put a pad on the inside of the door and then mount euro hinges. Might work and they will be concealed from sight. Just a thought,

Hamish