Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

using same brush for shellac and lacquer

Posts

using same brush for shellac and lacquer

#1

using same brush for shellac and lacquer

RobRing

>I'm going to try brushing nitrocellulose lacquer on my current project. I have a good-quality badger hair brush that I typically use for shellac. Is there any reason not to use this same brush for the lacquer? I�m a little worried about cross-contamination � should I be?

Re: using same brush for shellac and lacquer

#2

Re: using same brush for shellac and lacquer

Clint Searl, at the base of Haycock Mtn

>No need for a hair brush; a Purdy or Wooster soft poly will work fine. Reduce the lacquer 20% and lay it down quickly without rebrushing. Best if you rotate the piece to keep the working surface horizontal; hard to avoid runs and curtains otherwise. Good luck.

Clint

Re: using same brush for shellac and lacquer

#3

yes, be worried

Fred

>the solvents are different -- any residual not washed out will be released into the work.

i learned this the hard way

now, i keep dedicated brushes for lacquer, and ones for shellac.