Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Old woodworking machines *LINK*

Posts

Old woodworking machines *LINK*

#1

Old woodworking machines *LINK*

Dan Mitchell

>This is a follow-up to my post on an Atlas disk/belt sander I saw on Craig's list. The sander takes what seems to be a now non-standard belt, so I am going to pass on it. In investigating this however, I found a great website for officianados of old machinery. It's called, appropriately enough, "Old Woodworking Machines". They actually have a free DL of the manual for this sander, as well as for a lot of other equipment. Anyone interested in such equipment should check it out.

Dan


http://www.owwm.com/home.aspx

Re: Old woodworking machines *LINK*

#2

Re: Old woodworking machines

GalenV

>What if your table saw shows up as an old Sear made by Emerson Electric? Does that mean I can go out and get a new one and sell the old as an antique?

Well, then there is my band saw that is also made by Emerson for Sears and just a little newer.

I imagine my old bench grinder would qualify but that old spindle grinder is set up for all my lathe tools now.

Guess they all just aged with me and I know MY trade in value is low!

Re: Old woodworking machines *LINK*

#3

Re: Belts

Mark Mandell - Gone Round In Jersey

>Have you tried calling Klingspor? They might just make you a bunch at little or no extra cost.

Re: Old woodworking machines *LINK*

#4

Re: Old woodworking machines

ThomD

>I probably wouldn't let the belt thing disuade me. I didn't see your earlier post, but there are all kinds of alternatives for belts. Flat leather belts can be replaced with link belts, serpentine belts (reglued to any length), or new leather belts, it usually isn't a problem.

I think the definition of antique is fifty years +, or maybe it varies by category. A lot of the better manual machines are all antique!! It's arguable that if in WWII we had had the Chinese copies of machine tools we get today, we wouldn't have won the war.

Re: Old woodworking machines *LINK*

#5

Re: Old woodworking machines

Dan Mitchell

>Thom - The belt in question is the sanding belt itself, not a drive belt. I know these can be made up, but I'd prefer to avoid that hassle, given the availability of alternatives. Plus the belt on this machine is 4" wide; I'd prefer 6".

In general, I think the definition of "antique" is 100 years plus.

Thanks for the replies.

Dan