Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Saw table, planer, etc. lubricant?

Posts

Saw table, planer, etc. lubricant?

#1

Saw table, planer, etc. lubricant?

Ron Bauman

>Imagine my surprise yesterday when I picked up a spray can of "Top Coat" to aid the sliding of wood through my various machines. Last time out $11.99 yesterday $17.99. Good product, always happy with it, but I fear the price is finally too much. I've never had any problems with finishing after using it (silicon mucks up urethane). What do you use? I tend to shy away from wax since urethane can be finicky and I have enough problems. TIA

Re: Saw table, planer, etc. lubricant?

#2

Rick L

Re: Sprayway 801 *LINK*

Rick L

>http://www.spraywayinc.com/

I use sprayway 801 drylube. Does machinery tops and router bearings for $5 a can.


Sprayway

Re: Saw table, planer, etc. lubricant?

#3

Re: Saw table, planer, etc. lubricant? *LINK*

Jesse Cloud

>Try this stuff. It lubes well, can be "painted" onto screws, gears, etc. is biodegradable and recommended for food services equipment. A pint goes a lonnnnnggggg way.


slip it lube

Re: Saw table, planer, etc. lubricant?

#4

Aha.....

Mark Goodall - ATL - tooljunkie

>.... it's an "oil" right? So it's price is going up due to Hurricane Ike. ;)

Seriously though, a $2 can of Johnson's Paste wax lasts a long, long time. So long in fact, that the price probably jumped to $4 since the last time I bought a can.

Happy Woodworking!

Re: Saw table, planer, etc. lubricant?

#5

Re: Aha.....

Carol - now back in Dubuque, IA

>Ahhhh.... Mark.

$7

Sorry.

Re: Saw table, planer, etc. lubricant?

#6

JL

Re: Saw table, planer, etc. lubricant?

JL

>Silicone I've been wary of - what with fish eyes and the like. I've never had a real problem with wax though.

I've used car wax before. I currently use either Renaissance wax or reclaimed sanctuary candle wax. The car wax leaves a hard "shell", the other waxes are softer.

Re: Saw table, planer, etc. lubricant?

#7

Nah......

Mark Goodall - ATL - tooljunkie

>Hi Carol,

$7 for a large can of Johnson's Paste wax???? That must be from a WW store, not a grocery store (he said, hoping).

Yikes. I'm going to take a look this weekend at Krogers and see. I think I'm in for a surprise.

Happy Woodworking!

Re: Saw table, planer, etc. lubricant?

#8

Re: Saw table, planer, etc. lubricant?

Tony - Memphis

>Ive never used anything but wax on mine (Minwax paste wax) and I've never had any finish issues. I don't think there is enough transfer to make any significan difference. What it transferred probably is removed when scraping, sanding, etc. My can of Minwax is 15 years old and I still have some left in it. I use it on furniture too.

Tony

Re: Saw table, planer, etc. lubricant?

#9

Yep!..

Lee Schierer - McKean, PA

>I was in HD the other day and noticed that they have the good old Yellow and red can of Johnson paste wax on the shelf over inthe floor finishing section. I didn't need any so I didn't pay attention to the price.

Just don't use car wax as most contain water and many contain silicone. Water will cause rust and silicone can mess up your finishes.

Lee

Re: Saw table, planer, etc. lubricant?

#10

I make my own

Bill Tindall, E.TN

>Buy some solid Carnuba wax and dissolve it in warm turpentine to make a paste after cooling. I can't recall the ratio I used so you will have to experiment. I put this mix in an empty wax container, or a paint can would work. I put it on with a piece of synthetic sheepskin. I have used this stuff for many years without any finishing problems and I spray urethane, alkyd varnish, spar varnish, lacquer, conversion varnish and shellac.

You can dissolve the wax in xylene also but it doesn't smell as nice.

Re: Saw table, planer, etc. lubricant?

#11

So does he

Mark Goodall - ATL - tooljunkie

>Sorry, could't resist.

Happy Woodworking!


img