Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

dull a lacquer finish

Posts

dull a lacquer finish

#1

dull a lacquer finish

mike mcnerney

>I've got a fair build up of post cat but with just enough orange peel to bug me. when I try leveling with 600 or 1000 it's a bit shiny for me. What can I do after that to dull it a bit like a 30 or 40 sheen?

I don't want to use wax of any kind.

Mike McNerney, ottawa

Re: dull a lacquer finish

#2

Re: dull a lacquer finish

Clint Searl, at the base of Haycock Mtn

>I usually pull down the sheen of gloss lacquer with oooo steel wool and Butcher's wax. If you don't want the wax, perhaps a soapy slurry of pumice woud work. Or auto rubbing (not polishing) compound.

Clint

Re: dull a lacquer finish

#3

Re: dull a lacquer finish

Fred Davis

>If you use a auto rubbing compound like Mequiars for instance, you better check the label for the use intended or you could wind up with a gloss you can see you face in.

Rubbing with oooo and Butchers wax or Black Bison is a very fine hand rubbed effect finish, can't imagine why you wouldn't want a coat of wax on the finish, keeps the dirt off.

FredD

Re: dull a lacquer finish

#4

Take it below 600 if that's too shiny.

Tim Greif - West of Chicago

>I used to do car and bike painting with lacquer. I always sanded progressively to 600 before beginning the rubout. 600 is really pretty dull in my opinion. If that's still too shiny for you, drop down to 400 wet/dry lubricating with a small amount of soapy water. Or just retry the 600 wet.

Re: dull a lacquer finish

#5

Re: dull a lacquer finish *LINK*

Dick Coers

>I'm a fan of Abralon for changing the sheen. They have a 360 that will probably do the trick for you. This stuff is on 1/4" foam, so the grit will work like something much finer since it is cushioned. You can use it wet or dry. It won't leave the lines in the finish like 0000 steel wool. It's great!


abralon

Re: dull a lacquer finish

#6

Re: dull a lacquer finish

mike mcnerney

>thanks,

I tried to get the abralon but it wasn't available locally.

I ended up with oooo steel woold & the customer was happy. It's interesting how it appears (on a table top) dull looking straight down put pretty shiny from a low angle. I guess I always thought was has to be redone from time to time & it's too much work for the customer, admitadely I haven't tried was for years.

Mike McNerney