Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Weaving a Shaker Tape Seat,,,

Posts

Weaving a Shaker Tape Seat,,,

#1

Weaving a Shaker Tape Seat,,,

Rob Hix - King George, VA

>Hey all,

In a few short weeks, I am going to embark on an adventure in chair building. One of the chairs I want to build is a Shaker chair. I have the book "Chairmaking Simplified" by Kerry Pierce. In the chapter on weaving a seat from Shaker tape, he shows his simplified method of weaving the seat. However, he mentions the original method used by the Shakers. According to the book, they somehow used thread and did some type of sewing on the seats. Does anyone know of a source for this method? I would like my chair to be as authentic as possible.

Thanks in advance, again,

Rob Hix

Re: Weaving a Shaker Tape Seat,,,

#2

Re: Weaving a Shaker Tape Seat,,,

kirk constable

>Check the ShakerWorkshops website... they may have instructions posted there.

Re: Weaving a Shaker Tape Seat,,,

#3

Re: Weaving a Shaker Tape Seat,,,

Dave Peebles Lyons, Ohio!

>Hi Rob,

I made over two hundred Shaker chairs. I did a lot of research on them too. I have never heard of this. That doesn't mean it isn't true.:)

I also made the weaving vise for doing the seats. Shoot me an email and maybe I can provide some pics of my seat weaving vise.

To tell you the truth, most of my seat weaving was done at the dining room table. For some reason it seemed easier that the jig. I just can't remember why. It has been a few years ago.

Dave

Re: Weaving a Shaker Tape Seat,,,

#4

Re: Weaving a Shaker Tape Seat,,,

John McGaw

>I believe that needle and thread would be used for one purpose only -- to join the end of one piece of tape to another. I assume that this would be done on the bottom of the seat, probably hidden by a cross piece.

Re: Weaving a Shaker Tape Seat,,,

#5

Re: Weaving a Shaker Tape Seat,,,

Rob Hix - King George, VA

>Hey all,

After digging a little more last night, I found a reference to using needle and thread to join the tape pieces. I am also guessing that it was used when starting off. I imagine they would make a loop over the seat rung, sew that together to hold it and then start weaving.

Dave, I am about to shoot you that e-mail. Any help would be greatly appreciated.

Thanks all,

Rob Hix

Re: Weaving a Shaker Tape Seat,,,

#6

KC-Nice To See You Post-How Goes It?

George@Colonel's Workshop-Havertown PA

>

Re: Weaving a Shaker Tape Seat,,,

#7

Re: Weaving a Shaker Tape Seat,,,

Martin from Texas

>Dave,

Please post the pics here. Others would like to see also.

(or you can add me to the email list, either way)

Thanks!

Martin