Looking for 15" planer with Shelix cutterhead
Bart Goldberg
>Does anyone know where I can purchase a 15" planer with a Shelix cutterhead. Not interested in the Griz as their cutterhead is not a true Shelix design.
Regards
Bart
Knowledge You Can Build On — Est. 1998
Looking for 15" planer with Shelix cutterhead
Bart Goldberg
>Does anyone know where I can purchase a 15" planer with a Shelix cutterhead. Not interested in the Griz as their cutterhead is not a true Shelix design.
Regards
Bart
Re: Looking for 15" planer with Shelix cutterhead
Joanne in Pt. Pleasant, PA
>Powermatic makes a 20" that comes with the Byrd head. Seems to me Jim Shaver put a helical head in his General 15" planer (as well as in his jointer). Perhaps he'll jump in here to comment on that.
Looking at the Byrd Catalog...
JL
>I see that Shelix cutterheads are provided for the following planers:
Generic 15" 4 post
Powermatic Mod 15 15"
Powermatic P160 16"
Yorkcraft YC-15P 15"
Bridgewood BW-15P 16" 4 post
Delta DC380 15"
Others are available also. That's what a quick cursory look at the catalog showed me. You can also check on Byrd's website www.byrdtool.com.
Re: Looking at the Byrd Catalog...
Ray Newman
>Sunhill 15� planer --
www.sunhillmachinery.com/Planers%20CT382A.htm
Cutter head upgrade:
www.sunhillmachinery.com/Planer%20Cutterheads.htm
Re: Looking for 15" planer with Shelix cutterhead
Paul Cates - Henderson, KY
>I installed a Byrd cutterhead in my Jet 15" planer last summer. If you can find a good used 15" for a decent price, and the cutterhead on sale, it might be the way to go if you're mechanically inclined.
Here's one *LINK*
Henry Higginbotham
>I'm sure there are others. I have a Yorkcraft 15" that came with a Shelix, but as far as I know, Wilke is no longer selling equipment.
Powermatic 15HH
Re: Looking for 15" planer with Shelix cutterhead
Mike Fitterling
>Hi Bart,
I bought the Grizzly 15" planer with straight knives and not long after getting it replaced it with a Byrd head. I bought it from Brian at Holbren. I bought the planer at the introductory price so I am not sure if that would be cost effective now compared to buying a different brand with a Byrd already in it. I can tell you that the switch was pretty easy to do; in fact I have done it twice now, once for my machine and another time helping a fellow woodworker on his Jet 15". Most of these import 15" machines are identical as far as the cutterhead install goes. Brian can tell you for sure if the generic head will fit whatever you buy.
For new machines with Byrds already in them, I believe the Powermatic has a Byrd.
Good luck.