Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Wharton Esherick Corner Desk - Photos?

Posts

Wharton Esherick Corner Desk - Photos?

#1

Wharton Esherick Corner Desk - Photos?

charlile belden

>Since seeing Sfirri's article on the Wharton ESherick Corner Desk (the one with the pyramid folidng top and NOTHING joined square - with secret compartments and drawers that you'd never guess were drawers - I've been trying to put together top view, sided view front view drawings of this thing - and would like to do a 3D SketchUp version I could virtually play with. This thing is like a GoBot / Transformer combined with a Chinese Puzzle Box - designed by a Cubist Surrealist.

SO - if anyone here has any photos of this piece (yes - I've Googled and AllTheWeb searched for images or anything about it) - PLEASE post them here - or e-mail them to me.

Thanks for any tips, links, drawings, photos, sketches or any info on this piece - in advance (I'll thank you again later - honest).

charlie belden

Re: Wharton Esherick Corner Desk - Photos?

#2

Re: Wharton Esherick Corner Desk - Photos?

George@Colonel's Workshop-Havertown PA

>Good Afternoon Charlie,

I went through the Esherick Museum several years ago, and it was an astounding adventure. I suggest you contact them and ask. They seemed very accommodating to us as we marvelled at every room in his house.

George

Re: Wharton Esherick Corner Desk - Photos?

#3

Re: Wharton Esherick Corner Desk - Photos?

charlie belden

>George:

The piece in question is privately owned, apparently inherited from the woman who originally commissioned it. It's actually an "in normal use" desk as opposed to a "piece of art" to only be viewed.

Somehow, perhaps with a note from GOD, Mark Sfirri was permitted to photograph the desk AND open drawers, open the "hidden compartment" etc.. Though the article contains 15 color photos of the Corner Desk, one full three quarter view (if there is a three quarter view of a piece like this) and 14 detail shots, their not enough to get even a basic set of drawings of the outlines of the piece. And believe me - I've tried - even with SketchUp to do a 3-D "sketch".

Only the desk top and the two rear corner panels are flat, the backs meeting at 90 degrees to fit in a corner - everything else is compound angles or meet at compound angles.

Unlike all the other furniture I'm aware of, this desk is anything but predictable. Nothing about it - from the outside - is recognizable or even vaguely familar.

What I hope to do is do a 3D model that will allow the components to be manipulated virtually so interested folks can play with this thing. And this piece just begs to be played with.

charlie belden