Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Miter angles

Posts

Miter angles

#1

Miter angles

Kate Craig

>I'm looking into styrofoam crown molding. Everything I'm finding on the subject recommends using a miter box for the installation process. I've never used a miter box before. I'm looking at the miter angle chart right now. Can anyone explain it? It doesn't make any sense to me.

Re: Miter angles

#2

Re: Miter angles

Dick Coers

>The miter angle chart is set up so you can lay the stock flat on the table of the miter saw and cut. There are several fences, jigs, and holders available that will let you hold the molding at the same angle as used on the wall. With those, all you need is a 45 degree setting on the saw if all you corners are 90 degrees.

Re: Miter angles

#3

Re: Miter angles

George Koch

>Kate, are you using a miter box and hand saw or a compound miter saw?