Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Pressure rollers question for Performax?

Posts

Pressure rollers question for Performax?

#1

Pressure rollers question for Performax?

Barry Irby

>I have a Performax 16/32 I bought used and have used it for a few years. I just noticed that the infeed and out feed rollers do not apply much or any pressure to the stock. You can easily lift the rollers with a finger tip. They seem to have only their own weight. The question is, should they have more down force? Are they supposed to be spring loaded? What, if anything, should I do?

Re: Pressure rollers question for Performax?

#2

Re: Pressure rollers question for Performax?

Norman (Ottawa, Ont.)

>Barry,

I have the 16/32 also.

The tension rollers are spring-loaded and there is a procedure to adjust them in the manual.

Not sure if you have the Performax 16/32 Owner's Manual?

In any case, they need to be adjusted and the tension roller pressure can be adjusted by dialing in vertically mounted springs.

I checked the tension on mine, it is more than finger pressure, there is definitely tension there.. More than just the rollers in any case.

Norman