Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

What does 200 bdft make?

Posts

What does 200 bdft make?

#1

What does 200 bdft make?

Doug Reynolds in Seattle

>What does 200 bdft make in bedroom furniture? If I buy 200 bdft of nice figured cherry from a lumber yard on the east coast and have it shipped to Seattle, how much of a bedroom set can I make? I have plans for the usual dresser, chest of drawers, night stand, etc. but nowhere do the plans say how many board feet to buy. Since I am not at the lumber yard I cannot select the boards from a cut list like I normally would. Sure would be nice if I could just say the chest of drawers is 50" by 25" by 24" and will use secondary wood for the drawer side and backs and such so, this is how much primary wood I need to buy. I know a Sam Maloof rocker takes about 35 - 50 bd ft depending upon the usual waste factor. Anybody know of some rough estimates per piece of furniture?

Re: What does 200 bdft make?

#2

Dang *LINK*

Dustmaker Mike

>a Ceder chest 24" high x 60" long (2'x 5') takes 10bdf for the front. I am not sure of a regular dresser but if I where doing this, I would measure a few pieces of furniture you think you want to build and figure out the board foot. Also shipping 200 bdf from the east coast, why not try Eden Saw in Kent to see if they can beat the price. I know when I lived out that way they could and they even delivered.

Good Luck


eden saw

Re: What does 200 bdft make?

#3

Re: What does 200 bdft make?

Bill Tindall, E.TN

>"Sure would be nice if I could just say the chest of drawers is 50" by 25" by 24" and will use secondary wood for the drawer side and backs and such so, this is how much primary wood I need to buy"

Well, that is exactly how I estimate lumber needs. I have been through this exercise a multitude of times. It helps to know that I am frugal and will spend some effort to be efficient with lumber.

If you have lots of lumber to choose from, and you choose wisely, your waste will be nil. A friend and I recently built a Federal wall cabinet that wound up using 13 bdft of mahogany, each. I could hold the scrap from this project in my hand. But we had 100 bd ft to choose from and we choose pieces to cut that yielded little waste.

On the other hand, our customers typically bought lumber just for a project. I would suggest they add about 30% to the estimate arrived at as described by you.

Lumber is an excellent investment. Buy as much as you can afford and store.

Re: What does 200 bdft make?

#4

^^^^^^^Store^^^^^

Kneale Brownson dreaming of snow in N. MI

>What Bill Said: Buy what you can afford and store the leftovers for future use. You don't want to be waiting for another cross country shipment to finish that last drawer front.

Re: What does 200 bdft make?

#5

The other thing you can do...

John in NM

>Is use your figured lumber for prominent parts like tops, drawer fronts, etc, and use plain lumber from a local yard for case sides and the odd bit here and there.

I also estimate in roughly the way Bill outlined, and I always figure in about 20% over, 30% for cherry or walnut where I want to work around the sap wood. But I don't mind having a board or two left over when I'm done, the added cost of extra wood is really minimal compared to my time and fuel (2 hours driving to the yard) to buy just one more board.