Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

P'Max 22-44 Pro Conveyor Source

Posts

P'Max 22-44 Pro Conveyor Source

#1

P'Max 22-44 Pro Conveyor Source

Mark Mandell - Gone Round In Jersey

>I've about had it with the abrasive belt conveyor drive on my 22-44. The belt is fine but the joint is failing (again). Checked with Klingspor and they don't know from the 22-44 "Pro" model.

Anyone have a experience + source for the abrasive conveyor belts or the urethane belts for this machine?

Thanks

mm

Re: P'Max 22-44 Pro Conveyor Source

#2

Re: P'Max 22-44 Pro Conveyor Source

Clint Searl, at the base of Haycock Mtn

>If the belt is the same as for the Jet 22-44 Pro, it may be available directly from Jet at www.jettool.com

Clint

Re: P'Max 22-44 Pro Conveyor Source

#3

That's jetools.com

Clint Searl, at the base of Haycock Mtn

>

Re: P'Max 22-44 Pro Conveyor Source

#4

Re: P'Max 22-44 Belt

Mark Mandell - Gone Round In Jersey

>They don't list the poly belt as an option any more. I think it was about $260, much more than the abrasive belts, but not subject to separation of the seam.